Cisco 2100 Series Configuration Manual - Page 16
Browse online or download pdf Configuration Manual for Network Hardware Cisco 2100 Series. Cisco 2100 Series 50 pages. Cisco 8500 series
wireless lan controller
Also for Cisco 2100 Series: Configuration Manual (40 pages), Quick Start Manual (49 pages), Quick Start Manual (12 pages)
Print Page
Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs
to hand out leases to the connected clients. (Note: The WLC's DHCP server does not lease
addresses to the AP.) The instructions for doing so are included at the end of this document.
1
From the main menu, click Controller.
2
In the navigation pane, click Interfaces. Verify that the proper IP addresses are
assigned to the interfaces.
3
Under Interface Name click management. Note: the screenshot is from a Cisco 5500.
7.4 and later versions provide redundancy management and redundancy port entries.
7.6 and later versions support a virtual interface entry. If the interface is not present on
the model being configured, no values need to be entered.
4
Under DHCP Information, enter the IP address of the Primary DHCP Server.
5
Repeat this step for the ap-manager interface, if present on the model configured.
6
Click the Apply button and save the changes.
721-1001-000-AH.docx
December 2016
16