Cisco 2600 Series Release Notes - Page 4

Browse online or download pdf Release Notes for Network Hardware Cisco 2600 Series. Cisco 2600 Series 32 pages. Configuring adsl wic to support pppoe clients
Also for Cisco 2600 Series: Installation Manual (12 pages), Configuration (15 pages), Application Note (41 pages), Datasheet (6 pages), Appendix (15 pages), Installation Manual (22 pages), Overview (13 pages), Quick Start Manual (2 pages), Manual (5 pages)

Print Page

Routers and Interfaces Supported

Table 2

Interfaces Supported on Cisco 2600 Series Routers (continued)

Interface, Network Module, or Data Rate

Multiport T1/E1 ATM

Network Modules with

Inverse Multiplexing over

ATM (IMA)

Digital T1/E1 Packet Voice

Trunk Network Modules and

Multiﬂex Trunk WAN

Interface Cards

4 Release Notes for Cisco IOS Release 12.0(7)XK1 Feature Packs for Cisco 2600 Series Routers

4-port T1 ATM network module with IMA (NM-4T1-IMA[=])

4-port E1 ATM network module with IMA (NM-4E1-IMA[=])

8-port T1 ATM network module with IMA (NM-8T1-IMA[=])

8-port E1 ATM network module with IMA (NM-8E1-IMA[=])

1-port, 30-channel E1 voice/fax module, supports 30 channels of

G.729a/b, G.726, G.711 and fax or 18 channels of G.726, G.729,

G.723.1, G.728, G.729a/b, G.711, and fax. Consists of one NM-HDV,

three PVDM-12s, and one VWIC-1MFT-E1

1-port, enhanced 30-channel E1 voice/fax module, supports 30

channels of G.729a/b, G.726, G.729, G.728, G.723.1, G.711, and fax.

Consists of one NM-HDV, ﬁve PVDM-12s, and one

VWIC-1MFT-E1

(NM-HDV-1E1-30E[=])

2-port, 60-channel E1 voice/fax module, supports add/drop

multiplexing (drop and insert); 60 channels of G.729a/b, G.726,

G.711, and fax; or 30 channels of G726, G729, G723.1, G.728,

G.729a/b, G.711, and fax. Consists of one NM-HDV, ﬁve PVDM-12s,

and one VWIC-2MFT-E1-DI

1-port, 24-channel T1 voice/fax module, supports 24 channels of

G.729a/b, G.726, G.711 and fax or 12 channels of G.726, G.729,

G.723.1, G.728, G.729a/b, G.711, and fax. Consists of one NM-HDV,

two PVDM-12s, and one VWIC-1MFT-T1

1-port, enhanced 24-channel T1 voice/fax module, supports 24

channels of G.729a/b, G.726, G.729, G.728, G.723.1, G.711, and fax.

Consists of one NM-HDV, four PVDM-12s, and one

VWIC-1MFT-T1

(NM-HDV-1T1-24E[=])

2-port, 48-channel T1 voice/fax module, supports add/drop

multiplexing (drop and insert); 48 channels of G.729a/b,

G.726,G.711, and fax; or 24 channels of G726, G729, G723.1, G.728,

G729a/b, G711, and fax. Consists of one NM-HDV, four PVDM-12,

and one VWIC-2MFT-T1-DI

High-density voice/fax network module spare (NM-HDV=)

12-channel packet voice DSP module upgrade spare (PVDM-12=)

1-port RJ-48 multiﬂex trunk - T1 (VWIC-1MFT-T1=)

2-port RJ-48 multiﬂex trunk - T1 (VWIC-2MFT-T1=)

2-port RJ-48 multiﬂex trunk with drop and insert - T1

(VWIC-2MFT-T1-DI=)

1-port RJ-48 multiﬂex trunk - E1 (VWIC-1MFT-E1=)

2-port RJ-48 multiﬂex trunk - E1 (VWIC-2MFT-E1=)

2-port RJ-48 multiﬂex trunk with drop and insert - E1

(VWIC-2MFT-E1-DI=)

(NM-HDV-1E1-30[=])

(NM-HDV-2E1-60[=])

(NM-HDV-1T1-24[=])

(NM-HDV-2T1-48[=])

Routers Supported

All Cisco 2600 series routers