Cisco 2800 Series Quick Start Manual - Page 15

Browse online or download pdf Quick Start Manual for Network Hardware Cisco 2800 Series. Cisco 2800 Series 47 pages. Cisco ios software configuration
Also for Cisco 2800 Series: Quick Start Manual (13 pages), Datasheet (8 pages), Application Note (41 pages), Quick Start Manual (45 pages), Configuration (10 pages), Overview (27 pages), Datasheet (5 pages), Datasheet (20 pages), Configuring (32 pages)

Print Page

Installing the Router in a Rack

Warning

To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to

ensure that the system remains stable. The following guidelines are provided to ensure your safety:

• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.

• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component

at the bottom of the rack.

• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack.

Statement 1006

Caution

Be sure to leave space above and below each router in a rack to allow for cooling air circulation.

Use two screws for each side (supplied with the rack, not with the router). Suggestion: Start the lower pair of screws first, and

rest the brackets on the lower screws while you insert the upper pair of screws.

The screw slots in the brackets are spaced to line up with every second pair of screw holes in the rack. When the correct

Tip

screw holes are used, the small threaded holes in the brackets line up with unused screw holes in the rack. If the small

holes do not line up with the rack holes, you must raise or lower the brackets to the next rack hole.

Attaching the Cable Management Bracket

The cable management bracket provides attachment points for organizing and routing cables. Attach the cable management

bracket to the left or right rack-mount bracket using the screw provided. On rack-mount brackets for Cisco 2821 and

Cisco 2851 routers, you can attach the cable management bracket to either the upper or the lower threaded hole. See Figure 10

and Figure 11 for cable management bracket attachment locations.

Figure 10

Attaching the Cable Management Bracket to the Cisco 2801 Router

Cable management screw