Argo BOBO Operating Instructions Manual - Page 7
Browse online or download pdf Operating Instructions Manual for Heater Argo BOBO. Argo BOBO 10 pages. Digital ceramic fan heater
Print Page
7.
Brightness of screen button
The default brightness is 100% when switch on. Touch on the button
25%, and off display in a continuous cycle.
Note: If there are no operations in 1 minute when it is in 100% brightness, the brightness would turn to 50%
automatically to save energy.
Anti-tip device
This appliance is equipped with an anti-overturning system, which automatically stops the operation of the fan heater in
case of accidental overturning of the appliance. To reset it, disconnect the cable from the socket for a few minutes, place
the appliance in a vertical position, and reconnect the cable to the socket. If the problem persists, contact a qualified
service center.
Overheating protection device
This appliance is equipped with an overheating protection system, which automatically stops the operation of the fan
heater. If the protection system activates, turn off the fan heater, disconnect the power cord and let the appliance cool
down completely.
Contact a qualified service center.
The functions of the remote control correspond to those on the control panel. On first use, remove the transparent film
applied to the remote control.
Use a Lithium / Manganese button cell, model no. CR2025-3 V, compliant with Battery Directive no. 2006/66 / EC and
amendments from Directive 56/2013 / EC
The battery is supplied with the product, when using it for the first time, detach the plastic tab inserted in the remote
control to allow it to work.
HOW TO INSERT / REMOVE THE REMOTE CONTROL BATTERY (refer to the diagram below)
Open the battery cover at the back of the remote control (press the back and pull the flap). Insert the battery into the slot,
making sure you respect the polarities. Put the cover back onto the remote control.
TIRA
PREMI
Inserimento pila
V 05/21
REMOTE CONTROL
2
3
4
to change the brightness from 100%, 50%,
1
6
5
17