Argo CLOVER Operating Instructions Manual - Page 3

Browse online or download pdf Operating Instructions Manual for Heater Argo CLOVER. Argo CLOVER 12 pages. Wall-mounted ceramic fan heater

Print Page

risk of fire if the fan heater is covered or incorrectly positioned.

• The appliance is equipped with an IPX2 degree of protection and can

be used in private bathrooms in zone 2.

• Do not restrict the air inlet and outlet grilles.

• The appliance heats up significantly when running and can cause burns.

Avoid unprotected contact with the hot surface.

• Keep flammable materials, such as furniture, cushions, blankets, paper,

cloths, curtains and similar items at least 1 m away from the front, sides

and back of the appliance.

• Disconnect the mains power when the appliance is not in use or during

cleaning.

• Avoid using the fan heater in dusty environments or in the presence of

flammable vapours (e.g. in workshops or garages).

• Do not place anything on the product; avoid placing wet garments on

the fan heater.

• Use the fan heater in a well-ventilated area.

• Avoid placing fingers or foreign objects in the air inlet/outlet grilles, as

this may lead to electric shock or fire and may damage the fan heater.

• To prevent the risk of fire, do not block the grilles or tamper with them

in any way while the fan heater is in use.

• Do not use the appliance if the power cable or plug are damaged. If

the power cable is damaged, it must be replaced by the manufacturer

or its technical assistance service or in any case by a person with a

similar qualification, in order to prevent any risk.

• Do not use the fan heater if it has fallen from a certain height or if it has

been damaged in any way. Contact a service centre to check the fan

heater or make any necessary electrical or mechanical repairs.

• The most common cause of overheating is the build-up of dust in the

V 07/22