Argo HI FAN black mini Operating Instructions - Page 2

Browse online or download pdf Operating Instructions for Heater Argo HI FAN black mini. Argo HI FAN black mini 4 pages. Ceramic fan heater

Print Page

• Use this ceramic fan heater only as outlined in this manual. Any other use not recommended by the

manufacturer may cause fire, electric shock or injury to persons.

• Ensure that the mains power complies with the voltage specified on the fan heater's data plate

• This product is not a toy. Children should be adequately supervised to ensure that they do not play with the

appliance.

• This appliance is not suitable for use by persons (including children) with reduced physical, sensory or mental

abilities, or without the necessary experience and knowledge, unless they have been adequately supervised

and instructed concerning use of the appliance by a person responsible for their safety.

• Do not cover the appliance or restrict the air inlet and outlet grilles to prevent overheating.

• Ensure that all objects are at least 1 meter from the front and sides of the appliance.

• Disconnect the mains power when the appliance is not used or for cleaning operations.

• Avoid using the fan heater in dusty environments or in the presence of inflammable vapours (e.g. in

workshops or garages) or paint vapours.

• Do not use the appliance to dry clothing.

• Use the appliance in a well-ventilated area.

• Avoid placing fingers or foreign objects in the air inlet/outlet grilles, as this may lead to electric shock or fire

and may damage the appliance. To avoid the risk of fire, do not block the grilles or tamper with them in any

way while the ceramic fan heater operates.

• Do not use the appliance if the cord or plug are damaged. If the power supply cord is damaged, it must be

replaced by the manufacturer, dealer or a similarly qualified person so as to avoid any safety risks.

• Do not operate the appliance if it has fallen from a height or has suffered damage in any way. Contact

qualified technical personnel to examine the appliance or perform any electrical or mechanical repairs.

• The most common cause of overheating is the build-up of dust in the appliance. Remove dust deposits by

unplugging the appliance and cleaning the air outlets and grilles with the aid of a vacuum cleaner.

• Do not use abrasive detergents for cleaning this appliance. Clean the appliance with the aid of a damp (not

wet) cloth rinsed in hot soapy water. Always remove the plug from the mains socket before cleaning.

• To disconnect the ceramic fan heater, push the switch to OFF and remove the plug from the socket. Pull on

the plug only. Avoid pulling on the cord when disconnecting the ceramic fan heater.

• Do not place any objects on the cord and do not bend it.

• It is not advisable to use extension cords, as these may overheat and cause the risk of fire. Do not use a

single extension cord to operate multiple appliances.

• Do not immerse the cord, plug or any other element of the appliance in water or other liquids.

• Do not touch the plug with wet hands.

• Do not place the fan heater above or near another heat source.

WARNING: AVOID COVERING THE FAN HEATER TO PREVENT IT FROM OVERHEATING.

The symbol below signals the above warning:

• The fan heater may cause the risk of fire if, while in operation, is covered by or comes into contact with

inflammable material including curtains, drapery, blankets, etc. KEEP THE FAN HEATER AWAY FROM

THESE MATERIALS.

• Do not connect the appliance to the mains power before it has been properly assembled and positioned.

• The appliance heats up slightly when in use. In order to avoid burns, do not let bare skin touch hot surfaces.

V 05/10

GENERAL SAFETY INFORMATION

(230V~/50Hz).