Cisco 7200-I/O-GE+E User Manual

Browse online or download pdf User Manual for Network Hardware Cisco 7200-I/O-GE+E. Cisco 7200-I/O-GE+E 16 pages. Input/output controllers

Print Page

Cisco 7200-I/O-GE+E and Cisco 7200-I/O-2FE/E

Input/Output Controllers

This feature module describes the two new variants of the Cisco 7200 I/O card. The

Cisco 7200-I/O-GE+E provides one Gigabit Ethernet port and one Ethernet port. The

Cisco 7200-I/O-2FE/E provides two autosensing Fast Ethernet 10/100 Mb ports.

This document includes the following sections:

•

Feature Overview

The Cisco 7200-I/O-GE+E is an Input/Output controller that provides one Gigabit Ethernet and one

Ethernet port. It is equipped with a GBIC receptacle for 1000 megabits per second (Mbps) operation

and an RJ-45 receptacle for 10 Mbps operation.

The Cisco 7200-I/O-2FE/E is an Input/Output controller that provides two autosensing Fast Ethernet

ports and is equipped with two RJ-45 receptacles for 10/100 Mbps operation.

I/O controllers support the following features:

•

Feature Overview

Supported Platforms

Supported Standards, MIBs, and RFCs

Configuration Tasks

Monitoring and Maintaining the Cisco 7200-I/O GE+E and Cisco 7200-2FE/E

Configuration Examples

Command Reference

Dual EIA/TIA-232 channels for local console and auxiliary ports

NVRAM for storing the system configuration and environmental monitoring logs

Two PC Card slots that hold Flash disks or Flash memory cards for storing the default Cisco IOS

software image

Flash memory for storing the boot helper image

Two environmental sensors for monitoring the cooling air as it enters and leaves the chassis

12.1(5)T and 12.2(14) S