Cisco 7513 Series Quick Start Manual - Page 41

Browse online or download pdf Quick Start Manual for Network Hardware Cisco 7513 Series. Cisco 7513 Series 44 pages. Chassis replacement
Also for Cisco 7513 Series: Replacement Instructions Manual (26 pages), Datasheet (11 pages), Manual (30 pages), Maintaining (20 pages), Replacement Instructions Manual (19 pages), Replacement Instructions Manual (22 pages)

Print Page

Install Field Replaceable Units (FRUs)

Remove and Replace the Power Supply

Redundant power supplies support online insertion and removal (OIR); if you remove one power supply, the

second power supply immediately ramps up to maintain uninterrupted operation. In this case, proceed to Step 2.

If you have only one power supply, you must turn off power before removing and replacing it. In this case,

proceed to Step 1.

Step 1

Turn off the power source.

Step 2

Turn off the switch on the power supply.

Step 3

Disconnect the power cable from the power source.

Step 4

Disconnect the power cable from the power supply.

For the AC-input power supply: Lift up the cable retention clip and remove the power cable from the

AC receptacle.

Captive

installation

screw

LEDs

AC power

receptacle

On/off switch

Powe

front

Locking device