Argo DRY BABY 11 Operating Instructions Manual - Page 8
Browse online or download pdf Operating Instructions Manual for Dehumidifier Argo DRY BABY 11. Argo DRY BABY 11 10 pages.
Also for Argo DRY BABY 11: Operating Instructions Manual (6 pages), Operating Instructions Manual (8 pages)
Print Page
MAINTENANCE OF THE HUMIDIFIER'S EXTERIOR SURFACE
Warning
Always pull the dehumidifier's plug out of the power socket before cleaning it, to prevent electric
shock and malfunction.
Warning
Do not wet the appliance or immerse it in water, otherwise electric shocks may occur.
Use a damp and soft cloth to clean the exterior surface of the dehumidifier.
Do not use solvents, petrol, xylene, talcum powder or brushes to clean the unit: these may damage
the surface or colour of the casing.
We advise removing the tank once every few weeks to prevent mould and bacteria forming on it. Fill the tank with clean
water a small amount of detergent; swill the water around in it, then it out and rinse it thoroughly.
V 09/17
CLEANING AND MAINTENANCE
CLEANING THE WATER TANK
CLEANING THE AIR FILTER
The filter is designed to remove dust or dirt from the air.
If the filter is clogged by dust, electricity consumption will be higher than
normal.
Cleaning instructions:
1.
Remove the tank.
2.
Remove the filter by pulling down the flap complete extraction.
Clean the filter washing it with warm soapy water.
DO NOT USE ALCOHOL, BENZENE OR OTHER AGGRESSIVE
PRODUCTS TO CLEAN THE FILTER.
Leave the filter to dry naturally, then reposition it in its slot.
3.
Reinsert the filter pushing it upwards until you hear a sound.
4.
Reposition the tank.
Do not use the dehumidifier without the filter as dust may affect the efficiency
of the evaporator, resulting in higher energy consumption.
18