Argo DRY PURY 25 Operating Instructions Manual - Page 11

Browse online or download pdf Operating Instructions Manual for Dehumidifier Argo DRY PURY 25. Argo DRY PURY 25 15 pages.

Print Page
Argo DRY PURY 25 Operating Instructions Manual
6. Auto Button
Each time the button is pressed, the unit emits an auditory signal.
BUTTONS & LEDS
1.
POWER BUTTON: press this button to turn the dehumidifier on and off.
2.
HUMIDITY BUTTON: press this button to adjust the % of humidity to desired value (30-80%) – each step 5%
3.
FAN SPEED BUTTON: press this button to adjust the ventilation speed (Low or High). When you need fast
dehumidification, select high fan speed, when you need the unit to work quietly, select low fan speed.
4.
TIMER BUTTON: To program the switching on or off of the appliance. the Timer can be set in the 1-24 hours
sequence
5.
FILTER BUTTON: After 250 hours of operation, the FILTER led turns on to indicate that it is time to clean the filter.
Take the filter out and clean it. Then press the FILTER button.
6.
AUTO BUTTON: Press this button to set the automatic dehumidification mode, when the appliance enters this
mode it automatically sets the most comfortable humidity. To exit the automatic dehumidification, just select the
humidity with the appropriate button.
DISPLAY
The display shows the humidity present in the environment. Press the Humidity button to select the desired
humidity. 5 seconds later it will return to show the humidity detected in the environment.
LED Filter: filter needs to be cleaned.
LED HIGH AND LOW FAN SPEED : it shows the set fan speed: High and Low.
LED TIMER: it shows that the timer is set (sequence 1-24 hours)
LED Full: When the tank is full or it's not correctly positioned the LED Full comes on and flashes, the appliance
stops running. A 10 second beep sounds. Remove the tank and empty it (as indicated in "HOW TO ELIMINATE
CONDENSATION"), the restore it; the dehumidifier will start running again.
DEFROST: the dehumidifier is designed to operate at ambient temperatures from + 5°C to + 32°C.
If it is operated at low temperatures, ice may form on the evaporator, degrading its operation.
When this happens, the dehumidifier goes into defrost mode. The compressor stops, but the fan continues running.
V 07/20

CONTROL PANEL

Water tank FULL light
Filter cleaning indicator
Timer indicator
4. Timer Button
5. Filter Button
High fan speed
Low fan speed
3. Fan Button
Display
2. Humidity Button
1. Power Button
26