Sony Alpha 5000 Instruction Manual - Page 33

Browse online or download pdf Instruction Manual for Digital Camera Sony Alpha 5000. Sony Alpha 5000 41 pages. Interchangeable lens digital camera

Print Page

• In sandy or dusty places

Be careful not to let sand or dust get into the camera. This may cause the camera to

malfunction, and in some cases this malfunction cannot be repaired.

About the grip

The grip is applied with a special coating. The grip may be discolored if it is rubbed

with a dark colored cloth, leather, etc.

On storing

Be sure to attach the front lens cap when not using the camera.

Notes on the screen and lens

• The screen is manufactured using extremely high-precision technology, and over

99.99% of the pixels are operational for effective use. However, some tiny black

and/or bright dots (white, red, blue or green) may appear on the screen. These dots

are a normal result of the manufacturing process, and do not affect the recording.

• There are magnets attached to the back of the screen and in the area around the

flash. Do not put objects that are affected by magnetic fields, such as a floppy disk

or a credit card to the screen or the camera body.

• When the lens is operating, be careful not to let your finger be caught by the lens.

On using the lenses and accessories

It is recommended that you use Sony lenses/accessories designed to suit the

characteristics of this camera.

Using the products of other manufacturers may cause the camera not to operate to its

capability, or result in accidents and malfunctions of the camera.

Notes on the flash

• Do not carry the camera by the flash unit, or use excessive force on it.

• If water, dust or sand get into the open flash unit, it may cause a malfunction.

• Be sure to keep your fingers out of the way when you press the flash down.

On camera's temperature

Your camera and battery may get hot due to continuous use, but it is not a

malfunction.

On the overheat protection

Depending on the camera and battery temperature, you may be unable to record

movies or the power may turn off automatically to protect the camera.

A message will be displayed on the screen before the power turns off or you can no

longer record movies. In this case, leave the power off and wait until the camera and

battery temperature goes down. If you turn on the power without letting the camera

and battery cool down enough, the power may turn off again or you may be unable

to record movies.

On charging the battery

If you charge a battery that has not been used for a long time, you may be unable to

charge it to the proper capacity.

This is due to the battery characteristics. Charge the battery again.