Argo Wallner BCD 408 Instruction Manual - Page 12

Browse online or download pdf Instruction Manual for Paper Shredder Argo Wallner BCD 408. Argo Wallner BCD 408 16 pages.

Print Page

OPERATION

FEEDING THE PAPER/ CREDIT CARDS/ CDS

1. Set the operation button into "I" position, the shredder is going to standby mode.

2. Make sure not to place more sheets of paper then the maximum amount indicated

by the producer.

3. Place the paper into the proper entry, the machine will start automatically. When the

shredding will be completed the machine will stop automatically.

4. Set the operation button into "R" position. Place one CD into the proper entry, the

machine will start automatically. When the shredding will be completed set the ope-

ration button into "O" position.

5. Place one credit card into the proper entry, the machine will start automatically. When

the shredding will be completed the machine will stop automatically.

6. When the shredding has been completed set the operation button into "O" position

and unplug the machine.

CAUTION:

It is forbidden to place more sheets of paper then the maximum amo-

unt indicated by the producer. If the machine will be overloaded, then please proceed ac-

cording to the information given in the "paper jam" section.

CAUTION:

Never attempt to shred more than one credit card/CD at a time or the

shredder will jam. Never attempt to shred both paper and credit cards/CDs at the same

time. Doing so will damage the shredder.

MOTOR PROTECTION

The shredder is equipped with a motor overload device.

After 2 minutes of continuous work allow the unit to cool for 30 minutes before restarting.