Argo Wallner G30L Instruction Manual - Page 7

Browse online or download pdf Instruction Manual for Paper Shredder Argo Wallner G30L. Argo Wallner G30L 8 pages. Guillotine

Print Page

NOTE!

During the usage of laser indicator special precautions should be taken, do not point the

laser beam to eyes, do not look at it, do not point the laser to mirror surfaces. Don't give

children to play.

WAY Of USING

in case of cutting maximum amount of sheets of paper at a time it is recommended also to

cut small amounts of paper what allows self-sharpening of blade throug contact of blade

with counterblade. there is a rule in all guillotines - the bigger amount of sheets cut at a

time – the smaller quality of cutting.

INSTRUCTION

Place the guillotine on the stable base. lift the blade up to the maximum position. Put the

paper down in the guillotine along the vertical slide and lower the blade with right hand.

Standard templates of formats on the bases.

NOTE!

it is forbidden to cut bigger amount of paper than stated in instruction, it could cause the

permanent damages of cutting blade.

MAINTENANCE

Guillotine can be cleaned with dry rag. Never use solvents or water. From time to time oil

the blade with silicone fluid or liquid vaseline, using the rag. it will guarantee smooth work

of knives and will protect the steel from rust.

dEfECTS

in case of appearance of defect, the device along wih warranty card and defect's descrip-

tion should be taken to the seller or to the nearest authorized service. Device could be

taken to the further repair, that is why user should preserve the original and complete

packaging. in case of transferring the device to repair without original or incomplete

packaging, a risk of damaging the device while transporting is on the buyer side. that

is why in case of lack of original packaging in the buyer's interest is to prepare the best

substitute packing.

Nasza oferta w internecie: www.argo.pl