Cisco Aironet 1250 Series Configuration Manual - Page 31
Browse online or download pdf Configuration Manual for Network Hardware Cisco Aironet 1250 Series. Cisco Aironet 1250 Series 40 pages. Aironet 1250 series
Also for Cisco Aironet 1250 Series: Datasheet (14 pages), Manual (37 pages), Hardware Installation Manual (10 pages)
Print Page
Section 2: WMM
10. Set the
11. The handsets do not support dynamic power and will not utilize the
PN: 1725-36192-001_H
Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs
Screenshot for 1140 and 1250 series access points:
7. In the navigation pane under
8. Set
802.11b/g Network Status
after setting radio parameters.
For setting up the
survey, designed for voice traffic, to determine if you have sufficient
coverage to support all data rates. SpectraLink Wireless
Telephones require the following minimum dBm reading to support
the corresponding
802.11
Radio Standard
802.11b
802.11g
802.11a
For additional details on RF deployment please see the Deploying
Enterprise-Grade Wi-Fi Telephony white paper and the Best
Practices Guide for Deploying SpectraLink 8020/8030 Wireless
Telephones.
9. Use the default
Fragmentation Threshold
Beacon Period
information element that is set when DTPC Support is enabled. The
802.11b/g/n
to
. The radio will be re-enabled
Disable
please consult your facility's RF site
Data Rates,
data rate setting in the access point.
Mandatory
Minimum Available
Signal Strength (RSSI)
-70 dBm
-60 dBm
-63 dBm
-47 dBm
-60 dBm
-45 dBm
to
.
100
, click
.
Network
Maximum
"Mandatory" Data Rate
1 Mb/s
11 Mb/s
6 Mb/s
54 Mb/s
6 Mb/s
54 Mb/s
(2346 bytes).
31