Sony PMW-200 Operating Instructions Manual - Page 20
Browse online or download pdf Operating Instructions Manual for Digital Camera Sony PMW-200. Sony PMW-200 32 pages. Solid-state memory
camcorder
Also for Sony PMW-200: Brochure & Specs (8 pages), Brochure & Specs (4 pages), Getting Started (2 pages), Service Manual (23 pages)
Print Page
Recording
Basic Operation Procedure
4
Preparing the lens cap
PMW-200
Preparations
1
Mount a fully charged battery pack.
2
Load SxS memory card(s).
If you load two cards, recording is continued
by automatically switching to the second
card when the first card becomes full.
3
Adjust the angle of the LCD monitor for
the best view.
When you wish to use the EVF, fold the LCD
monitor to its park position and adjust the
angle of the EVF.
4
Open the lens cap/Remove the lens cap.
PMW-200
Pull up the lens cap open/close lever to open the
lens cap built in the lens hood.
PMW-100
Remove the lens cap.
20
Basic Operation Procedure
3
LCD monitor
6
angle
adjustment
FULL AUTO
7, 8
REC START/STOP
9
REC REVIEW (on the grip)
1
Battery pack insertion
2
SxS memory card slots
5
Set the power switch to the ON position.
The recording screen is displayed.
When using the remote commander, activate the
remote control mode (page 16).
Note
When you hold the camcorder by the grip, support it
from underneath with your left hand.
Recording (Full Auto mode)
6
Press the FULL AUTO button so that
the button indicator lights.
Full Auto mode is turned on, activating the
TLCS (Total Level Control System) ("Menu
Configuration and Detailed Settings" in
operating instructions (PDF)). Auto Iris
(PMW-200)/Auto Exposure (PMW-100),
AGC (Auto Gain Control), Auto Shutter,
ATW (Auto Tracing White) are set to ON,
consequently the brightness and white
balance will be automatically adjusted.
When you wish to adjust them manually, turn
Full Auto mode off, and see;
5
Power switch:
ON (the " position)