STF (Smooth Trans Focus) Lens
Manual focus only
SAL135F28
Teleconverter compatible
135mm F2.8 [T4.5] STF
•
Lens groups/elements: 6/8
( includes 1 group with 2 APD elements)
•
Minimum focus: 3-1/" (0.87 m)
•
Filter diameter: 72 mm
•
Size: (diameter x length): 3-1/8 x 3-7/8"
(80 x 99 mm)
•
Weight: 1 lb 9.7 oz (730 g)
The special-purpose lens allows you to create truly unique
images with exceptionally smooth transitions between in-focus
and defocused areas. This is achieved through apodization
optics, which gives your images added dimensionality and
also contributes to the natural spread of highlights. Clarity at
the point of focus is superb, and vignetting and double-line
defocusing are avoided. A separate manual aperture ring
gives you added control over defocusing of objects at the
edges of the image.
1
SAL13F28 (13mm F2.8 [T.] STF)
Ideal Defocusing with the
STF Lens
In a conventional lens, the amount of light
collected at the periphery of the lens is roughly
equal to the amount of light at the center. This
results in uniformly sharp objects at points
b and c, below. The STF lens, however, uses
a special filter called an "apodization
optical element" that collects less light at
the lens periphery, which results in diffusion
at the edges of the objects instead.
Smoother defocusing is due to this optical
characteristic.
Conventional lens
STF lens
Apodization optical element
A
A
a
a
b
c
b
c
Defocusing of conventional
Defocusing of STF lens
lens (around focus point "a")
(around focus point "a")
STF Lens & T Numbers
Because the STF lens collects less light overall
than conventional lenses, F-stops are replaced
by T (transmission) numbers. In practice,
the two types of values can be used
interchangeably to determine exposure.
Reflex Super-Telephoto Lens
SAL500F80
500mm F8 Reflex
•
Lens groups/elements: /7
(includes 1 filter)
•
Minimum focus: 11-1/2" (.0 m)
•
Filter diameter: 2 mm (rear slide-in type)
•
Size: (diameter x length): 3-1/2
x -/8" (89 x 118 mm)
•
Weight: 1 lb 7. oz (66 g)
A unique reflex lens that provides autofocusing through
the innovative combination of a mirror lens system and the
camera's AF sensor. Captures impressively clear images
with none of the chromatic aberration that often mars
conventional refractive lenses, and produces distinctive
ring-shaped defocusing effects. Light and compact for a
super-telephoto lens, and thus an ideal option for nature
and wildlife photography, especially as a means of
minimizing gear. Includes focus hold button.
Icons:
Circular aperture
Internal focusing
Focus Hold Button
Focus Range limiter
• For details, please refer to the
SAL00F80 (00mm F8 Reflex)
Autofocusing in a Reflex
Telephoto Lens
In AF operation, distance is usually measured
with a beam of light that transmits through the
lens at around F6.7 to F8. If the aperture is any
smaller, then AF cannot function. However, the
SAL00F80 overcomes this limitation by using
a modified optical design in combination with
the camera's highly sensitive AF sensor. First,
the secondary mirror was reduced in size so
as not to obstruct the metering light. Next, the
primary mirror was enlarged to improve light
collection efficiency. Finally, aberrations were
corrected at the rear of the lens to ensure high
sharpness while also enabling AF.
Secondary mirror
Primary mirror
Sensor position (equivalent)
Image sensor for AF
Detail of AF sensor
Condenser lens
Separator lens
Exit pupil of 00mm lens
Light beam required for AF
ADI flash metering
SSM (Super sonic wave motor)
1
Lens Technology section on p.26–28.
Print Page