Sony SRG-120DS Operating Instructions Manual - Page 18
Browse online or download pdf Operating Instructions Manual for Digital Camera Sony SRG-120DS. Sony SRG-120DS 24 pages.
Print Page
Appendix
Message List
The following messages and indications may appear for this camera. Perform the following as necessary.
Lamp display
Lamp
When the power is turned on, the
STANDBY lamp and POWER
lamp are lit, flash together, or
flash alternately.
The STANDBY lamp is lit.
Screen display
Message
PRESET n:OK
("n" is a preset position number
between 1 and 16)
RECALL n:OK
("n" is a preset position number
between 1 and 16)
RESET n:OK
("n" is a reset position number
between 1 and 16)
ONE PUSH WB:OP
ONE PUSH WB:OK
ONE PUSH WB:NG
Meaning and solution
The SYSTEM SELECT switch or the BOTTOM switch is not set correctly.
Check the setting of each switch.
If the camera is moved forcibly, or a finger or other object interferes with camera movement,
the camera's built-in processor may fail to memorize the pan/tilt position.
Press the PAN-TILT RESET button of the infrared remote commander to reset the pan/tilt
position.
Meaning and solution
This message appears for about 3 seconds when you store camera settings to POSITION
1 to 16.
The preset position number of the infrared remote commander is POSITION 1 to 6.
This message appears for about 3 seconds when you read the camera settings stored in
POSITION 1 to 16.
The preset position number of the infrared remote commander is POSITION 1 to 6.
This message appears for about 3 seconds when you reset camera settings stored in
POSITION 1 to 16.
The preset position number of the infrared remote commander is POSITION 1 to 6.
During the white balance adjustment in the ONE PUSH white balance mode, this message
blinks on the screen.
When the white balance adjustment has been done correctly in the ONE PUSH white
balance mode, this message is lit on the screen.
When the white balance adjustment has failed in the ONE PUSH white balance mode, this
message blinks on the screen.
18