Sony XCL-CG510C Technical Manual - Page 7

Browse online or download pdf Technical Manual for Digital Camera Sony XCL-CG510C. Sony XCL-CG510C 48 pages. Digital video camera module

Print Page

Location and Function

of Parts and Operation

a Lens mount (C-mount)

Attach any C-mount lens or other optical equipment.

Note

Use a C-mount lens with a protrusion (a) extending from

the lens mount face (b) of 10 mm or less.

When you use the camera with the lens attached, the

resolution of the image output from the camera may

differ according to the performance of the lens. Note it

when you select a lens.

The performance of a lens may change according to the

aperture level.

If the resolution is not enough, adjust the aperture level.

b Guide screw holes (Top)

c Guide screw holes / Tripod screw holes (Bottom)

When using a tripod, use these four screw holes to attach

a VCT-333I tripod adaptor.

d Reference screw holes (Bottom)

These precision screw holes are for locking the camera

module. Locking the camera module into these holes

secures the optical axis alignment.

Note

Refer to the outer dimensions on page 47 about the

guide hole and the position and size of standard hole.

To use the tripod, install the tripod adaptor VCT-333I

(not supplied) on the camera module.

Use a tripod screw with a protrusion (4) extending from

the installation surface, as follows, and tighten it, using

a screwdriver. Be sure that the protrusion (4) does not

exceed 5.5 mm in length.

Length 4.5 to 5.5 mm

Note

If you install a tripod adapter (not supplied), use the

screws provided.