Sony 3-287-077-14(2) Operating Instructions Manual - Page 34
Browse online or download pdf Operating Instructions Manual for Stereo System Sony 3-287-077-14(2). Sony 3-287-077-14(2) 48 pages. Sony mini hi-fi component system operating instructions
Print Page
Starting playback takes more time
than usual.
• The following MP3 discs take a longer
time to start playback.
– a disc recorded with a complicated
tree structure.
– a disc recorded in multisession mode.
– a disc that has not been finalized
(a disc to which data can be added).
– a disc that has many folders.
USB device
You cannot start transferring to an
USB device.
• The following problems may have
occurred.
– The USB device is full.
– The number of audio files and folders
on the USB device has reached the
upper limit.
– The USB device is write-protected.
Transferring is stopped before it is
finished.
• You are using an unsupported USB
device. See "Compatible USB devices
with this system" (page 44) for the
supported device types.
• The USB device is not formatted
correctly. Refer to the USB device
operation manual on how to format.
• Turn off the system and remove the
USB device. If the USB device has a
power switch, turn the USB device off
and then on again after removing it from
the system. Then perform transferring
again.
• If the transferring and erase operations
are repeated multiple times, the file
structure within the USB device
becomes complex. Refer to the USB
device operation manual on how to deal
with this problem.
34
GB
Transferring to an USB device results
in an error.
• You are using an unsupported USB
device. See "Compatible USB devices
with this system" (page 44) for the
supported device types.
• The USB device was disconnected or
the power was turned off during
transferring. Delete the partially-
transferred file, and transfer again. If
this does not fix the problem, the USB
device may be broken. Refer to the USB
device operation manual on how to deal
with this problem.
• Turn off the system and remove the
USB device. If the USB device has a
power switch, turn the USB device off
and then on again after removing it from
the system. Then perform transferring
again.
Audio files or folders on the USB
device cannot be erased.
• Check if the USB device is write-
protected.
• The USB device was disconnected or
the power was turned off during the
erase operation. Delete the partially-
erased file. If this does not fix the
problem, the USB device may be
broken. Refer to the USB device
operation manual on how to deal with
this problem.
Are you using a supported USB
device?
• If you connect an unsupported USB
device, the following problems may
occur. See "Compatible USB devices
with this system" (page 44) for the
supported device types.
– The USB device is not recognized.
– File or folder names are not displayed
on this system.
– Playback is not possible.
– The sound skips.
– There is noise.
– A distorted sound is output.
– Transferring stops before it is finished.