Sony BDV-E3100 Quick Start Manual - Page 14

Browse online or download pdf Quick Start Manual for Stereo System Sony BDV-E3100. Sony BDV-E3100 17 pages. Blu-ray disc/dvd home theatre system
Also for Sony BDV-E3100: Limited Warranty (1 pages), Quick Setup Manual (2 pages), Speaker Installation Manual (2 pages), Speaker Installation Manual (2 pages), Specifications (5 pages), Quick Setup (2 pages), Quick Setup Manual (2 pages), Service Manual (4 pages)

Print Page

Troubleshooting

If you experience any of the following difficulties while using

the system, use this troubleshooting guide to help remedy the

problem before requesting repairs.

Also consult the Operating Instructions on the following website:

http://support.sony-europe.com/

The power does not turn on.

Check that the AC power cord (mains lead) is securely

connected to the wall outlet (mains).

The system does not work normally.

Disconnect the AC power cord (mains lead) from the wall

outlet (mains), then reconnect after several minutes.

The system does not output sound of the TV program when

connected to a set-top box.

Check the connections.

Select the correct input of the system to which the set-top box

is connected.

A disc does not play.

The region code of the disc does not match the system.

Moisture has condensed on the lenses inside the main unit.

Remove the disc and leave the main unit turned on for about

half an hour.

The disc is not correctly finalized.

Reducing power usage to less than 0.3 W in

Press HOME, and then press /// to select [Setup]. Check that

the following settings are made:

Select [System Settings] > [HDMI Settings] > [Control for HDMI],

then set [Control for HDMI] to [Off ].

Select [System Settings] > [Quick Start Mode], then set [Quick

Start Mode] to [Off ].

Select [Network Settings] > [Remote Start], then set [Remote

Start] to [Off ].