Cisco ASA 5506-X Mount And Connect - Page 6

Browse online or download pdf Mount And Connect for Network Hardware Cisco ASA 5506-X. Cisco ASA 5506-X 12 pages. Threat defense reimage guide
Also for Cisco ASA 5506-X: Quick Start Manual (10 pages), Quick Start Manual (14 pages), Easy Setup Manual (11 pages), Software Manual (37 pages), Installation Manual (46 pages), Mount The Chassis (10 pages), Hardware Installation Manual (26 pages)

Print Page
Cisco ASA 5506-X Mount And Connect

Connect Cables, Turn on Power, and Verify Connectivity

Figure 5: ASA 5506H-X Installed with the DIN Rail
The chassis is now installed in the DIN rail.
What to do next
See
Connect Cables, Turn on Power, and Verify Connectivity, on page 6
Connect Cables, Turn on Power, and Verify Connectivity
After positioning or mounting the ASA, follow these steps to connect cables, turn on power, and verify
connectivity:
Step 1
Connect the network cables:
a) Management interface – Using this Management 1/1 Gigabit Ethernet port, you can connect a management computer
directly with an Ethernet cable, or you can connect the computer and the ASA to the same management network. Be
sure the PC is configured to obtain an IP address using DHCP.
Mount and Connect
6
Mount and Connect
to finish setting up your ASA.