Cisco ASA 5506-X Mount The Chassis - Page 9

Browse online or download pdf Mount The Chassis for Network Hardware Cisco ASA 5506-X. Cisco ASA 5506-X 10 pages. Threat defense reimage guide
Also for Cisco ASA 5506-X: Quick Start Manual (10 pages), Quick Start Manual (14 pages), Easy Setup Manual (11 pages), Software Manual (37 pages), Mount And Connect (12 pages), Installation Manual (46 pages), Hardware Installation Manual (26 pages)

Print Page

Mount the Chassis

Figure 8: Attach the DIN Rail Bracket to the ASA 5506H-X

Step 2

Locate the plastic tab on the end of the DIN rail bracket that extends past the chassis. Press the tab in and slide the plastic

latch piece out while the tab is pressed down to put it into the locked position.

Step 3

Turn the chassis sideways so that the power connector is near the top.

Step 4

Position the rear edge of the chassis directly in front of the DIN rail making sure that the DIN rail fits in the space between

the plastic latch and the metal hook.

Step 5

Position the chassis so that the hook on the DIN rail bracket hooks onto the top edge of the DIN rail. The weight of the

chassis can rest on the hook temporarily while the DIN rail bracket latches are secured.

Step 6

Push the DIN rail bracket latch up when the chassis is over the DIN rail to secure it. This snaps the latch into the closed

position which locks it onto the DIN rail.

Install the ASA 5506H-X in a DIN Rail

Mount the Chassis