Sony LBTZT4 - Mini Hi-Fi Shelf System Operating Instructions Manual - Page 36
Browse online or download pdf Operating Instructions Manual for Stereo System Sony LBTZT4 - Mini Hi-Fi Shelf System. Sony LBTZT4 - Mini Hi-Fi Shelf System 48 pages. Sony mini hi-fi component system operating instructions
Print Page
• The number of files in a folder has
exceeded 999.
• Files that are encrypted or protected by
passwords, etc. cannot be played back.
* This system supports FAT16 and FAT32, but
some USB device may not support all of these
FAT. For details, refer to the operation
manual of each USB device or contact the
manufacturer.
Tuner
Severe hum or noise, or stations
cannot be received. ("TUNED" or
"ST" flashes on the display.)
• Connect the antenna properly.
• Find a location and an orientation that
provide good reception, and then set up
the antenna again.
• Keep the antennas away from the
speaker cords, the power cord and the
USB cable to avoid picking up noise.
• Connect a commercially available
external antenna.
• Consult your nearest Sony dealer if the
supplied AM antenna has come off the
plastic stand.
• Turn off nearby electrical equipment.
Tape deck
The sound exhibits excessive wow or
flutter or dropout.
• Clean the capstans and pinch rollers.
Also, clean and demagnetize the tape
heads. See "Precautions" for details
(page 38).
36
GB
Meter
Meter pointer does not move.
• "MTR POINTER" is set to "OFF" in the
OPTIONS menu. Select other settings.
• Meter mode is set to "METER OFF".
Press METER MODE on the unit
repeatedly to select other modes.
• The headphones are connected to the
PHONES jack. Disconnect the
headphones.
Meter display is turned off.
• "MTR POINTER" and
"M-BACKLIGHT" are set to "OFF" in
the OPTIONS menu. Select other
settings.
• Meter mode is set to "METER OFF".
Press METER MODE on the unit
repeatedly to select other modes.
Meter display is flashing.
• "MTR POINTER" and
"M-BACKLIGHT" are set to "FLASH"
in the OPTIONS menu. Select other
settings.
• Meter mode is set to "EXCITE 1" or
"EXCITE 2". Press METER MODE on
the unit repeatedly to select other
modes.