Sony MCH-V11 Operating Instructions Manual - Page 17
Browse online or download pdf Operating Instructions Manual for Stereo System Sony MCH-V11. Sony MCH-V11 44 pages. Home audio system
Print Page
Tuner
Listening to the radio
1
Press FUNCTION repeatedly
until "FM" appears on the
display.
2
Perform tuning.
For automatic scanning
Press TUNING MODE repeatedly
until "AUTO" appears on the
display, and then press TUNING+/–.
Scanning stops automatically when
a station is found.
If the scanning does not stop, press
to stop scanning, then perform
manual tuning (below).
For manual tuning
Press TUNING MODE repeatedly
until "MANUAL" appears on the
display, and then press TUNING+/–
repeatedly to tune to the desired
station.
When you tune to a station that
provides RDS services, the station
name appears on the display
(except for North American model).
Hint
To reduce static noise on a weak FM stereo
station, press REPEAT/FM MODE repeatedly
until "MONO" appears on the display to turn
off stereo reception. You will lose stereo
effect, but reception will improve.
Presetting radio stations
1
Tune to the desired station.
2
Press TUNER MEMORY to
select the tuner memory
mode.
3
Press PRESET+/– repeatedly
to select the desired preset
number.
If another station is already
assigned to the selected preset
number, the station is replaced by
the new station.
4
Press
to store the station.
5
Repeat steps 1 through 4 to
store other stations.
You can preset up to 20 FM
stations.
The preset stations are retained
for about half a day even if you
disconnect the AC power cord or if
a power failure occurs.
To listen to the preset station
Press TUNING MODE repeatedly until
"PRESET" appears on the display then
press PRESET+/– repeatedly to select
the desired preset number.
17
GB