Sony MEX-BT3700U Operating Instructions Manual - Page 19
Browse online or download pdf Operating Instructions Manual for Stereo System Sony MEX-BT3700U. Sony MEX-BT3700U 45 pages. Bluetooth audio system
Also for Sony MEX-BT3700U: Installation/Connections (2 pages), Specifications (2 pages), Quick Manual (2 pages), Installation/Connections (2 pages), Quick Manual (2 pages)
Print Page
Deleting registration of all
paired devices
Operating an audio device with this
unit
You can perform the following operations on this
unit if the audio device supports AVRCP (Audio
Video Remote Control Profile) of Bluetooth
technology. (The operation differs depending on
the audio device.)
*
Depending on the device, it may be necessary to
press twice.
Operations other than the above should be
performed on the audio device.
Notes
• During audio device playback, information such as
track number/time, playback status, etc., of
a
connected audio device
is
not displayed on this unit.
• Even if the source
is
changed on this unit, playback
of the audio device does not stop.
Tip
You can connect
a
cellular phone that supports A2DP
(Advanced Audio Distribution Profile) as an audio
device and listen to music.
1
Press
(OFF).
This unit is turned off.
2
If"
0 "
lights, press and hold
@I) until
"0"
turns off.
3
Press and hold the select button.
4
Press the select button repeatedly
until "BT INIT" appears.
5
Press
(SEEK)
+.
Initializing starts.
It takes 3 seconds to cancel all registration.
Do not tum off the power while "INITIAL" is
flashing.
-
®
(PAUSE)* on this unit.
®
(PAUSE)* on this unit.
SEEK -/+
(~/~)
[once for
each track]
Press
Play
Pause
Skip tracks
To
Listening to music from an audio
device
You can listen to music of an audio device on this
unit if the audio device supports A2DP
(Advanced Audio Distribution Profile) of
Bluetooth technology.
1
Turn down the volume on this unit.
2
Press
(SOURCE)
repeatedly until "BT
AUDIO" appears.
3
Operate the audio device to start
playback.
4
Adjust the volume on this unit.
Adjusting the volume level
The volume level is adjustable for any difference
between the unit and the Bluetooth audio device.
1 Start playback of the Bluetooth audio device at
a moderate volume.
2 Set your usual listening volume on the unit.
3 Press the select button repeatedly until "BTA"
appears, and rotate the volume control dial to
adjust the input level (-8 dB to
+
18 dB).
Music streaming
Notes
• Check that unit and cellular phone are connected
beforehand.
• Store
a
voice tag on your cellular phone beforehand.
• If
you activate voice dialing with
a
cellular phone
connected to this unit, this function may not always
work in some cases.
• Noises such as the engine running may interfere
with sound recognition. In order to improve
recognition, operate under conditions where noise
is
minimized.
• Voice dialing may not work in some situations,
depending on the effectiveness of the cellular
phone's recognition function. For details, see the
support site (page 27).
Tips
• Speak in the same way as you did when you stored
the voice tag.
• Store
a
voice tag while seated in the car, via this unit
with "BT PHONE" source selected.
19