Sony MEX-BT3800U - Bluetooth Audio System Operating Instructions Manual - Page 25
Browse online or download pdf Operating Instructions Manual for Stereo System Sony MEX-BT3800U - Bluetooth Audio System. Sony MEX-BT3800U - Bluetooth Audio System 44 pages. Bluetooth audio system
Also for Sony MEX-BT3800U - Bluetooth Audio System: Installation/Connections (2 pages), Limited Warranty (1 pages), Installation/Connections (2 pages), Specification Sheet (2 pages), Service Manual (50 pages)
Print Page
Deleting registration of all
paired devices
Operating an audio device with this
unit
You can perform the following operations on this
unit if the audio device supports AVRCP (Audio
Video Remote Control Profile) of Bluetooth
technology. (The operation differs depending on
the audio device.)
*
Depending on the device, it may be necessary to
press twice.
Operations other than the above should be
performed on the audio device.
Notes
• During audio device playback, information such as
track number/time, playback status, etc., of
a
connected audio device is not displayed on this unit.
• Even if the source is changed on this unit, playback
of the audio device does not stop.
Tip
You can connect
a
cellular phone that supports A2DP
(Advanced Audio Distribution Profile) as an audio
device and listen to music.
To
Play
Pause
Skip tracks
Press
®
(PAUSE)* on this unit.
®
(PAUSE)* on this unit.
SEEK -/+
(~/~)
[once for
each track]
Other functions
Changing the sound settings
Adjusting the sound
characteristics
1
Press the select button repeatedly
until the desired item appears.
2
Rotate the control dial to adjust the
selected item.
3
Press ~ (BACK).
The setting is complete and the display
returns to nonnal reception/play mode.
The following items can be set (follow the page
reference for details):
EQ3
Selects an equalizer curve from 7 music types
(XPLOD, VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
LOW*1, MID*1, HI*1 (page 26)
BAL (Balance)
Adjusts the sound balance between the left and
right speakers.
•
FAD (Fader)
Adjusts the relative level between the front and
rear speakers.
SUB*2 (Subwoofer volume)
Adjusts the subwoofer volume.
1
Press and hold
(SOURCE/OFF)
for 1
second to turn off the power.
2
If
"0"
lights, press and hold
ill)
until"
0 "
turns off.
3
Press and hold the select button.
4
Press the select button repeatedly
until "BT INIT" appears.
5
Press
(SEEK)
+.
Initializing starts.
It takes 3 seconds to cancel all registration.
Do not tum off the power while "INITIAL" is
flashing.
AUX*3 (AUX level)
Adjusts the volume level for each connected
auxiliary equipment:
"+18
dB" -
"0
dB" -
"-8
dB."
This setting negates the need to adjust the
volume level between sources.
BTA*4 (BT-Audio level)
Adjusts the volume level for each connected
Bluetooth audio device:
"+
18
dB" -
"0
dB" -
"-8
dB."
This setting negates the need to adjust the
volume level between sources (page 24).
*
1 When EQ3 is activated.
*2 "ATT'is displayed at the lowest setting, and can be
adjusted up to 21 steps.
*3 When AUX source is activated (page 27).
*4 When Bluetooth audio source is activated
(page 24).
25