Sony MHC-DP800AV Operating Instructions Manual - Page 9

Browse online or download pdf Operating Instructions Manual for Stereo System Sony MHC-DP800AV. Sony MHC-DP800AV 32 pages. Sony mhc-dp700 stereo system: user guide

Print Page
Setting up your speakers
for Dolby Pro Logic
(MHC-DP800AV only)
Dolby Pro Logic Surround improves the sound
image by using four separate channels. These
channels manipulate the sound to be heard and
enhance the action on the screen.
Positioning the speakers
1
Place the front speakers at an angle of
45 degrees from your listening
position.
Center
Front
speaker
speaker (L)
45°
Rear
speaker (L)
2
Place the center speaker at about the
same height as the front speakers.
Align the center speaker with the front
speakers or place it slightly behind the
front speakers.
3
Place the rear speakers facing each
other at about 60 to 90 cm above your
listening position.
60 to 90 cm
Front
speaker (R)
Rear
speaker (R)
Rear speaker
Specifying the distance of
the speakers
Use the remote for the operation.
1
Press AMP MENU.
2
From your listening position, press v
or V repeatedly to select the parameter.
Adjustable parameters are described below.
3
Press b or B repeatedly to select the
setting you want.
4
Repeat steps 2 to 3 to set other
parameters.
5
Press ENTER.
Tip
You can use the digipad instead of the cursor buttons
(v/V/b/B).
Note
If each of the front or rear speakers is not placed at an
equal distance from your listening position, set the
distance of the closest speaker.
Adjustable parameters
The default settings are in the parentheses.
• FRNT: 1.0 meter to 12.0 meters (2.4 meters)
(3 feet to 40 feet (8 feet))*
Front speakers distance.
• CTR: FRNT to 1.5 meters (2.4 meters)
(FRNT to 5 feet (8 feet))*
Center speaker distance.
• REAR: FRNT to 4.5 meters (1.5 meters)
(FRNT to 15 feet (5 feet))*
Rear speakers distance.
* North American model only.
Note
To enjoy Dolby Pro Logic surround with 2 channel
PCM or analog input sources, select "NORMAL
SURR" from the sound effect options (see page 21).
9