Sony MHC-DX60AV Operating Instructions Manual - Page 14

Browse online or download pdf Operating Instructions Manual for Stereo System Sony MHC-DX60AV. Sony MHC-DX60AV 32 pages. Sony corporation operating instructions mini hi-fi component system mhc-rg70av/dx60av

Print Page

Presetting radio stations (continued)

To erase a preset station

Press and hold TUNER MEMORY until a

preset number appears in the display.

Press . or > (or PRESET – or + on

the remote) repeatedly to select the preset

number you want to erase.

Select "ALL ERASE" when you want to

erase all the preset stations.

Press ENTER.

"COMPLETE" appears.

When you erase a preset number, the preset

number decreases by one and all preset

numbers following the erased one are

renumbered.

To change the AM tuning interval

(except for the European and Middle

Eastern models)

The AM tuning interval is factory-set to 9 kHz

(10 kHz in some areas). To change the AM

tuning interval, tune in any AM station first,

then turn off the system. While holding down

ENTER, turn the system back on. When you

change the interval, all the AM preset stations

are erased. To reset the interval, repeat the

same procedure.

Tip

The preset stations are retained for half a day even if

you unplug the power cord or if a power failure

occurs.

Listening to the radio

— Preset Tuning

Preset radio stations in the tuner's memory first

(see "Presetting radio stations" on page 13).

Press TUNER/BAND repeatedly to

select "FM" or "AM".

Press . or > (or press PRESET –

or + on the remote) repeatedly to tune

in the desired preset station.

Preset number

* When only one station is preset, "ONE

PRESET" appears in the display.

To listen to non-preset radio stations

Use manual or automatic tuning in step 2.

For manual tuning, press + or – (or TUNING +

or – on the remote) repeatedly. For automatic

tuning, press and hold + or – (or TUNING + or

– on the remote).

Tips

• When an FM stereo program has static noise, press

STEREO/MONO repeatedly until "MONO"

appears. There will be no stereo effect, but the

reception will improve.

• To improve broadcast reception, adjust the supplied

antennas.

Frequency*