Sony MHC-EX700 Operating Instructions Manual - Page 15
Browse online or download pdf Operating Instructions Manual for Stereo System Sony MHC-EX700. Sony MHC-EX700 32 pages. Mini hi-fi component system
Print Page
Notes
• When transferring music from a CD, the
tracks are transferred as 128 kbps MP3 files.
When transferring music from an MP3 disc,
MP3 files are transferred at the same bit rate
as that of the original MP3 files.
• If you start transferring in shuffle play mode,
repeat play mode or in program play mode
(when no tracks or MP3 files are
programmed), the selected play mode is
automatically cancelled and the play mode
switches to normal play mode.
• While transferring music from an MP3 disc,
no sound is output and "HI-SPEED" appears.
• CD text information is not transferred in the
created MP3 files.
• If you cancel the process in the middle of
music transfer, an incomplete MP3 file will be
created up to the point when the transfer was
stopped.
• Transferring stops automatically if:
– the USB device runs out of space.
– the number of audio files on the USB device
reaches the limit for the number that the
system can recognize.
• If the folder to be erased contains non-MP3/
WMA/AAC format files or sub folders, these
are not erased.
• If a folder or file that you are trying to transfer
already exists on the USB device with the
same name, a sequential number is added after
the name without overwriting the original
folder or file.
• Do not remove the USB device or disconnect
the power cord during transfer or erase
operations. Doing so may corrupt the data on
the USB device or damage the USB device
itself.
Playing a file from the
USB device
The audio formats that can be played back
on this system are:
MP3, WMA* or AAC*
* Files with DRM (Digital Rights
Management) copyright protection cannot be
played back on this system.
Files downloaded from an online music store
may not be played back on this system.
1
Select the USB function.
Press USB (or FUNCTION
repeatedly).
2
Connect a USB device to the
(USB) port.
When the USB device is connected,
the display changes as follows:
"READING" t "STORAGE*"
* When connecting the USB device, the
volume label is displayed next if
recorded.
3
Start playback.
Press N (or NX on the unit).
Other operations
To
Press
Pause playback
X (or NX on the unit).
To resume playback,
press the button again*.
x.
Stop playback
Select a folder
Select a file
./>.
Hold down m/M
Find a point in a
file
during playback, and
release the button at the
desired point.
Select Repeat
REPEAT repeatedly
Play
until "REP" or "REP1"
appears.
* When playing a VBR MP3 file, the system
may resume playback from a different point.
+/– repeatedly.
15
GB