Sony MHC-GN70V Operating Instructions Manual - Page 39

Browse online or download pdf Operating Instructions Manual for Stereo System Sony MHC-GN70V. Sony MHC-GN70V 44 pages.

Print Page

Tape Deck

The tape does not record.

• The tab has been removed from the tape.

Cover the broken tab with adhesive tape.

• The tape has reeled to the end.

The tape does not record nor play or there is a

decrease in sound level.

• The tape heads are dirty. (See "Cleaning the tape

heads" on page 42).

• The record/playback heads are magnetized. (See

"Demagnetizing the tape heads" on page 42).

The tape does not erase completely.

• The record/playback heads are magnetized. (See

"Demagnetizing the tape heads" on page 42).

There is excessive wow or flutter, or the sound

drops out.

• The capstans or pinch rollers are dirty. (See

"Cleaning the tape heads" on page 42).

Noise increases or the high frequencies are erased.

• The record/playback heads are magnetized. (See

"Demagnetizing the tape heads" on page 42).

Tuner

There is severe hum or noise ("TUNED" or

"STEREO" flashes in the display).

• Adjust the antenna.

• The signal is too weak. Connect an external

antenna.

• Set "CD POWER OFF" by CD power manage

function (page 19).

A stereo FM program cannot be received in

stereo.

• Press FM MODE so that "MONO" disappears.

If the system still does not operate

properly after performing the above

measures or other troubles not

described above occur, reset the

system as follows:

Use buttons on the system for the operation.

Unplug the power cord.

Plug the power cord back in.

Press x, AMP MENU and ?/1 at the same

time.

Press ?/1 to turn on the system.

The system is reset to factory settings. All the

settings are cleared.

MHC-GN70 4-246-556-11 (3)