Sony MHC-GN800 Operating Instructions Manual - Page 8
Browse online or download pdf Operating Instructions Manual for Stereo System Sony MHC-GN800. Sony MHC-GN800 36 pages. Mini hi-fi component system
Also for Sony MHC-GN800: Service Manual (2 pages), Operating Instructions Manual (36 pages)
Print Page
3 Connect the subwoofer
(MHC-GN800 only).
Connect the subwoofer cords to the
SUBWOOFER terminals and the system
cord to the SYSTEM CONTROL jack. Be
sure to match the color of the cord and
terminals/jacks.
SUBWOOFER terminals
Insert only the stripped portion.
Grey/Solid (3)
Black/Stripe (#)
SYSTEM CONTROL jack
To disconnect
Notes
• Be sure to make this connection before you connect
the main unit's power cord to a wall outlet.
• Place the subwoofer at least 0.3 meters (1 feet)
away from the main unit.
4 Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
Extend the FM lead
antenna horizontally
GB
8
5 For models equipped with a voltage
selector, set VOLTAGE SELECTOR to
the position of your local power line
voltage.
6 Connect the power cord to a wall outlet.
Grey
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
If the supplied adaptor on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with an adaptor).
To connect optional components
See page 28.
To attach the speaker pads
Attach the supplied speaker pads to the bottom
of the speakers to stabilize the speakers and to
prevent them from slipping.
AM loop antenna
VOLTAGE SELECTOR
230-
240V
220V
120V
MHC-GN800 4-244-569-13 (3)