Sony MHC-GR5 Operating Instructions Manual - Page 13
Browse online or download pdf Operating Instructions Manual for Stereo System Sony MHC-GR5. Sony MHC-GR5 28 pages. Mini hifi component system sony mhc-gr5
Print Page
Recording a CD
You can record from a CD to a tape.
Use TYPE I (normal) or TYPE II (CrO
tapes. Do not use TYPE IV (metal) tapes for
recording.
To listen to other sources while recording,
you must stop recording.
Recording a CD
Automatically
By using CD SYNCHRO, you can record
from a CD to a tape quickly.
Use the buttons on the unit to do this
operation.
POWER n ON
SURROUND
3
DOLBY NR
1
Press § EJECT and insert a blank tape
into deck B with the side you want to
record on facing forward.
Recording will start from the front side
of the tape, unless you have changed the
playing direction before recording.
Make sure the tabs on the cassette have
not been removed.
2
Press § OPEN/CLOSE and place a CD.
Then, press § OPEN/CLOSE again to
close the disc tray.
3
Select dual or single-sided recording.
To record
Press DIRECTION
to select
A
One side of the tape
ß or RELAY
Both sides*
* Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
4
Press CD SYNCHRO.
Deck B stands by for recording.
5
Press P PAUSE to release recording
pause.
Recording starts.
After about 10 seconds, the CD starts
playing.
To stop recording
Press p on deck B or the CD player.
To add the surround effect
Press SURROUND so that "SUR
)
2
appears in the display.
You can record the sound with surround
effect.
The equalizer you adjusted will no be
recorded.
To activate DOLBY NR
When you want to reduce the hiss noise in
low-level high-frequency signals, press
DOLBY NR so that "DOLBY NR B" appears
in the display after step 3.
Recording a CD Manually
You can record a CD as you like, for
instance, record just the songs you want or
record from the middle of the tape.
p
POWER n ON
2
4
5
4
1
p
5
1
Press § EJECT and insert a blank tape
into deck B with the side you want to
record on facing forward.
Recording will start from the front side
of the tape, unless you have changed the
playing direction before recording.
Make sure the tabs on the cassette have
not been removed.
2
Press § OPEN/CLOSE and place a CD.
Then, press § OPEN/CLOSE again to
close the disc tray.
3
Press FUNCTION repeatedly until "CD"
appears in the display.
4
Select dual or single-sided recording.
To record
One side of the tape
Both sides*
* Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
5
When you want to reduce the hiss noise
in low-level high-frequency signals,
press DOLBY NR so that "DOLBY NR
B" appears in the display.
6
7
"
8
To
Stop recording
Pause recording
Stop CD play
Pause CD play
Recording a CD:
Selecting Tape
Length
8
Automatically (tape
p
select edit)
2
3
You can have the stereo system select and
6
indicate the most suitable tape length for
recording each disc automatically.
p
You cannot use Tape Select Edit for discs
7
which contain 21 tracks or more.
1
5
7
Press DIRECTION to
select
A
ß or RELAY
continue to next page
Press r REC.
Deck B stands by for recording.
Press P PAUSE to release recording
pause.
Recording starts.
Press fl on the CD player.
The CD starts playing.
Press
p on deck B
P PAUSE
p on the CD player
fl on the CD player
POWER n ON
1
Chapter 4: the Tape Player
EN
13
2
1
6
7
4
3