Sony MHC-RG66T Operating Instructions Manual - Page 10
Browse online or download pdf Operating Instructions Manual for Stereo System Sony MHC-RG66T. Sony MHC-RG66T 28 pages. Mini hi-fi component system
Also for Sony MHC-RG66T: Operating Instructions Manual (28 pages), Operating Instructions Manual (28 pages)
Print Page
Playing the CD (continued)
To
Play repeatedly
(Repeat Play)
Cancel Repeat
Play
Exchange other CDs
while playing
Remove the CD
*1
All the tracks repeated up to five times.
You cannot use this function during SHUFFLE
ALL DISCS.
*2
To repeat the current track you are playing.
Tip
Pressing the CD while the power is off automatically
turns the power on and CD is selected as a function.
Programming the CD
tracks
–– Program Play
You can make a program of up to 25 tracks
from all the CDs in the order you want them to
be played.
1
Press CD.
2
Press PLAY MODE repeatedly until
"PROGRAM" appears in the display.
3
Press one of the DISC 1~3 to select a
CD.
To program all the tracks on a CD at once,
proceed to step 5 while "AL" appears on the
display.
GB
10
Do this
Press REPEAT repeatedly to
*1
select "REPEAT"
or
*2
"REPEAT 1"
.
Press REPEAT until
"REPEAT" or "REPEAT 1"
disappears from the display.
Press DISC SKIP
EX-CHANGE.
Press OPEN/CLOSE Z.
4
Press . or > repeatedly until the
track you want appears in the display.
Disc tray
Track
number
number
PROGRAM
5
Press ENTER.
The track(s) is (are) programmed. The
program step number appears, followed by
the total playing time.
6
To program additional tracks, repeat
steps 3 to 5.
Skip step 3 to select tracks from the same
disc.
7
Press hH.
To
Do this
Cancel Program Play
Press PLAY MODE
repeatedly until "1 DISC" or
"ALL DISCS" appears in
the display.
Clear a track from
Press CLEAR on the remote
the end
when playback is stopped.
Add a track to the
1 Press one of the DISC
program when
1~3 buttons to select a
playback is stopped
CD.
2 Press . or >
repeatedly to select the
track.
3 Press ENTER.
Tips
• The program you made remains in the system's
memory even after it has been played back. Press
hH to play the same program again.
• If "--.--" appears instead of the total playing time
during programming, this means:
– you have programmed a track number
which exceeds 20.
– the total playing time has exceeded 100 minutes.
MHC-RG77 4-238-409-13 (1)
Total playing time
(including selected
track)