Sony MHC-RG70AV - Mini Hi-fi Component System Operating Instructions Manual - Page 18

Browse online or download pdf Operating Instructions Manual for Stereo System Sony MHC-RG70AV - Mini Hi-fi Component System. Sony MHC-RG70AV - Mini Hi-fi Component System 32 pages. Sony corporation operating instructions mini hi-fi component system mhc-rg70av/dx60av

Print Page

Recording to a tape (continued)

Recording a CD by specifying

track order

— Program Edit

When programing, make sure the playing times

for each side do not exceed the length of one

side of the tape.

Load a CD and load a recordable tape

into deck B.

Press CD.

Press PLAY MODE repeatedly until

"PROGRAM" appears in the display.

Press one of DISC 1 – 3 to select a CD.

To program all the tracks on a CD at once

proceed to step 6 with "AL" displayed.

Press . or > until the desired

track appears in the display.

Press ENTER.

The track is programed. The program step

number appears, followed by the total

playing time.

To program additional tracks, repeat

steps 4 to 6.

Skip step 4 to select tracks from the same

disc.

Press X to pause at the end of side A.

Repeat steps 5 and 6 for the same disc

or 4 to 6 for tracks from another disc to

program the remaining tracks to be

recorded on side B.

Press CD SYNC.

Deck B stands by to record in the direction

of the indication on hH (the right

indication lights to record on the forward

side and the left indicator lights to record on

the reverse side). The CD player stands by

for playback.

Press DIRECTION repeatedly to select

g to record on one side. Select j

(or RELAY) to record on both sides.

Press REC PAUSE/START.

Recording starts.

Tip

To check the required tape length for recording a CD,

press EDIT until "EDIT" flashes after you have

loaded a CD and pressed CD. The required tape

length for the currently selected CD appears, followed

by the total playing time for side A and side B

respectively (Tape Select Edit).

Note

You cannot use Tape Select Edit for discs containing

over 20 tracks.

Timer-recording radio

programs

You can record a preset radio station from a

specified time.

To timer-record, you must first preset the radio

station (see "Presetting radio stations" on page

13) and set the clock (see "Setting the time" on

page 9).

Tune in the preset radio station (see

"Listening to the radio" on page 14).

Press CLOCK/TIMER SET on the

remote.

"SET DAILY 1" appears.

Press v or V repeatedly to select "SET

REC", then press ENTER.

"ON" appears and the hour indication

flashes in the display.