Sony MHC-RV2 Operating Instructions Manual - Page 37

Browse online or download pdf Operating Instructions Manual for Stereo System Sony MHC-RV2. Sony MHC-RV2 40 pages. Sony operating instructions mini hi-fi component system mhc-rv2

Print Page

Additional Information

Precautions

On operating voltage

Before operating the system, check that the operating

voltage of your system is identical with the voltage of

your local power supply.

On safety

• The unit is not disconnected from the AC power

source (mains) as long as it is connected to the wall

outlet, even if the unit itself has been turned off.

• Unplug the system from the wall outlet (mains) if it

is not to be used for an extended period of time. To

disconnect the cord (mains lead), pull it out by the

plug. Never pull the cord itself.

• Should any solid object or liquid fall into the

component, unplug the system and have it checked

by qualified personnel before operating it any

further.

• The AC power cord must be changed only at a

qualified service shop.

On placement

• Do not place the system in an inclined position.

• Do not place the system in locations where it is:

— Extremely hot or cold

— Dusty or dirty

— Very humid

— Subject to vibrations

— Subject to direct sunlight.

• Use caution when placing the unit or speakers on

surfaces that have been specially treated (with wax,

oil, polish, etc.) as staining or discoloration of the

surface may result.

On heat build up

• Although the system heats up during operation, this

is not a malfunction.

• Place the system in a location with adequate

ventilation to prevent heat build up in the system.

• If you continuously use this system at a large

volume, the cabinet temperature of the top, side and

bottom rises considerably. To avoid burning

yourself, do not touch the cabinet.

• To prevent a malfunction, do not cover the

ventilation hole for the cooling fan.

On operation

• If the system is brought directly from a cold to a

warm location, or is placed in a very damp room,

moisture may condense on the lens inside the CD

player. Should this occur, the system will not

operate properly. Remove the CD and leave the

system turned on for about an hour until the

moisture evaporates.

• When you move the system, take out any discs.

If you have any questions or problems concerning

your stereo system, please consult your nearest Sony

dealer.

Notes on discs

• Before playing, clean the disc with a cleaning cloth.

Wipe the disc from the center out.

• Do not use solvents.

• Do not expose the disc to direct sunlight or heat

sources.

• Discs with non-standard shapes (e.g., heart, square,

star) cannot be played on this unit. Attempting to do

so may damage the unit. Do not use such discs.

Cleaning the cabinet

Use a soft cloth slightly moistened with mild

detergent solution.

To save a tape permanently

To prevent a tape from being accidentally recorded

over, break off the cassette tab from side A or B as

illustrated. If you later want to reuse the tape for

recording, cover the broken tab with adhesive tape.

Tab of side B

Break off the

cassette tab

of side A

Tab of side A

continued