Sony MHC-RXD6AV - 3 Cd Mini Shelf System Operating Instructions Manual - Page 37

Browse online or download pdf Operating Instructions Manual for Stereo System Sony MHC-RXD6AV - 3 Cd Mini Shelf System. Sony MHC-RXD6AV - 3 Cd Mini Shelf System 44 pages. Micro hi-fi component system
Also for Sony MHC-RXD6AV - 3 Cd Mini Shelf System: Operating Instructions Manual (44 pages)

Print Page

Notes on CDs

• Before playing, clean the CD with a cleaning cloth.

Wipe the CD from the center out.

• Do not use solvents such as benzene, thinner,

commercially available cleaners or anti-static

spray intended for vinyl LPs.

• Do not expose the CD to direct sunlight or heat

sources such as hot air ducts, nor leave it in a car

parked in direct sunlight.

Cleaning the cabinet

Use a soft cloth slightly moistened with mild

detergent solution.

To save a tape permanently

To prevent a tape from being accidentally recorded

over, break off the cassette tab from side A or B as

illustrated.

Tab of side B

If you later want to reuse the tape for recording,

cover the broken tab with adhesive tape.

Tab of side A

Side A

Break off the

cassette tab

of side A

Before placing a cassette in the

tape deck

Take up any slack in the tape. Otherwise the tape

may get entangled in the parts of the tape deck and

become damaged.

When using a tape longer than 90

minutes

The tape is very elastic. Do not change the tape

operations such as play, stop, and fast-winding etc.

frequently. The tape may get entangled in the tape

deck.

Cleaning the tape heads

Clean the tape heads after every 10 hours of use.

When the tape heads become dirty;

— the sound is distorted

— there is a decrease in sound level

— the sound drops out

— the tape does not erase completely

— the tape does not record

Make sure to clean the tape heads before you start

an important recording or after playing an old tape.

Use separately sold dry-type or wet-type cleaning

cassette. For details, refer to the instructions of the

cleaning cassette.

Demagnetizing the tape heads

Demagnetize the tape heads and the metal parts that

have contact with the tape every 20 to 30 hours of

use with a separately sold demagnetizing cassette.

For details, refer to the instructions of the

demagnetizing cassette.