Sony MHC-W77AV Operating Instructions Manual - Page 16
Browse online or download pdf Operating Instructions Manual for Stereo System Sony MHC-W77AV. Sony MHC-W77AV 33 pages.
Print Page
.
SESE
SSS
SS
Recording a CD:
Selecting Tape
Length (tape select
edit)
You can have the stereo system select and
indicate the most suitable tape length for
recording each disc automatically.
You cannot use Tape Select Edit for discs
which contain 21 tracks or more.
SYSTEM
POWER > ON
CC). er
aa.
t e c 8 A2®e
(
9
J
6
7
45
1 Press FUNCTION repeatedly until "CD"
appears in the display.
:
2 Press & OPEN/CLOSE/EX-CHANGE
and place a CD. Then, press 8 OPEN/
CLOSE/EX-CHANGE again to close the
CD tray.
If the button for the disc tray containing
the CD you want to record is not lit
green, press DISC SKIP repeatedly so
that it lights green.
3 Press EDIT.
"TAPE SELECT" appears and the player
divides the selections automatically.
Then the display changes as follows:
anes
:
3
"
Tape length required
F
3
i wwe
|
be
:
ee
eee
.
.
—
ee
ae
oa
ee
Vv —
cost eam
4 Insert a blank tape of the indicated
length (or longer) into deck B.
1 6
Chapter 4: the Tape Player
5 Select dual or single-sided recording.
Press DIRECTION
To record
MODE to select
One side
—_
of the tape
Both sides*
C=) or RELAY
* Recording always stops at the end of the
reverse side. Be sure to start from the
front side.
6 Press CD SYNCHRO.
Deck B stands by for recording.
7 Press IE PAUSE to release recording
pause.
Recording starts.
After about 10 seconds, the CD starts
plaving.
fa
Recording a CD:
Specifying Tape
Length (time edit)
You can have the stereo system create
programs that will fit the tape length. For
example, if you use a 40-minute tape to
record a 46-minute CD, the CD player will
automatically choose tracks that will fit
within the 40-minutes, filling as much of
the tape as possible. The player will not
program those tracks beyond track number
20. Use the buttons on both the unit and the
remote to do this operation.
SYSTEM
POWER > ON
Ne
£
DOLBY NR
1 Press FUNCTION repeatedly until "CD"
appears in the display.
2 Press & OPEN /CLOSE/EX-CHANGE
and place a CD.
Then, press
8 OPEN/CLOSE/EX-
CHANGE again to close the CD tray.
If the button for the disc tray containing
the CD you want to record is not lit
green, press DISC SKIP repeatedly so
that it lights green.
3 Press EDIT twice.
"TAPE SELECT" then "TIME EDIT"
appear in the display.
4 Turn the JOG dial (or press K€
or PPI
on the remote) to choose the indication
that corresponds to the length (in
minutes) of your tape.
The indications change as follows:
HALF «> C-46 «> C-54
(23.00)
(27.00)
C-90 «> C-74 +> C-60
(45.00)
(37.00)
(30.00)
Choose "HALF" if you want the CD
player to half of the total playing time of
the CD. You cannot select "HALF"
when recording CDs with more than 20
tracks.
5 Press EDIT.
The CD player determines the tracks to
be recorded on side A automatically.
Tracks to be recorded on side A
oe
Total playing time on side A
61 record on both sides, press EDIT
again. The CD player determines the
tracks to be recorded on side B.
If you only want to record on side A,
press Mon the CD player to stop the
flashing in the display.