Sony RCD-W2000ES - Cd/cdr Recorder Operating Instructions Manual - Page 25
Browse online or download pdf Operating Instructions Manual for Stereo System Sony RCD-W2000ES - Cd/cdr Recorder. Sony RCD-W2000ES - Cd/cdr Recorder 44 pages. Limited warranty (es products)
Also for Sony RCD-W2000ES - Cd/cdr Recorder: Limited Warranty (1 pages)
Print Page
3
Press one of the DISC 1-5 A buttons on
DECK A and place a CD on the disc
tray. PressA on DECK A again to close
the disc tray.
When you perform Make-Disc Synchro-
Recording, the current disc in DECK A is
used to record.
When you perform Synchro-Recording, you
can choose the disc which you want to
record, and the play mode.
If you select "ALL DISCS" even though
you want to record only one disc, discs you
did not intend to record may be recorded.
4
Press CD SYNCHRO HIGH.
DECK B stands by for recording, and
DECK A stands by for playing.
When you place a CD-R or CD-RW in the
deck, the unit optimizes itself for the best
possible recording and "OPC" appears
temporarily in the display.
If "Not Blank" appears, make sure that the
blank disc is placed correctly.
5
After "New Track" appears in the
display, press N on DECK B (or H on
the remote) to start recording.
High-Speed Synchro-Recording starts.
DECK A and DECK B automatically stop
after recording.
To stop recording
Press x.
Notes
• When you make Synchro-Recording in
programmed order, the recording speed
automatically changes to Normal speed. You can
perform only Normal speed Synchro-Recording.
• If you select "ALL DISCS" even though you want
to record only one disc, discs you did not intend to
record may be recorded.
Normal speed Synchro-
Recording
The disc is recorded at the same speed as the
playing CD. You can hear the sound during
recording. To use Make-Disc Synchro-
Recording, set "Make Disc" in the menu to
"On" beforehand (page 36).
When using the remote, set DECK A/DECK B
to DECK B.
CD SYNCHRO NORMAL
DECK A/DECK B
H
1
Do steps 1 to 3 of "High-Speed
Synchro-Recording" on page 24.
2
Press CD SYNCHRO NORMAL.
DECK B stands by for recording, and
DECK A stands by for playing.
3
After "New Track" appears in the
display, press N on DECK B (or H on
the remote) to start recording.
Synchro-Recording starts. DECK A and
DECK B will automatically stop after
recording.
N
x
CD SYNCHRO
NORMAL
x
continued
25