Sony RCD-W2000ES - Cd/cdr Recorder Operating Instructions Manual - Page 37

Browse online or download pdf Operating Instructions Manual for Stereo System Sony RCD-W2000ES - Cd/cdr Recorder. Sony RCD-W2000ES - Cd/cdr Recorder 44 pages. Limited warranty (es products)
Also for Sony RCD-W2000ES - Cd/cdr Recorder: Limited Warranty (1 pages)

Sony RCD-W2000ES - Cd/cdr Recorder Operating Instructions Manual

Messages

The following table explains the messages that
appear in the display.
Message
Explanation
Blank Disc
A blank CD-R/CD-RW you have
just bought or a CD-RW you have
entirely erased is in the unit.
Check Disc
You are trying to record or edit a
finalized disc or CD. Or you are
trying to edit a CD-R.
Complete!
Editing has been completed
successfully.
Data Disc
You are trying to record or edit a
non audio CD-R/CD-RW.
• Insert an audio CD-R/CD-RW.
Disc Full!
There is not enough time left on the
CD-R/CD-RW or there are no
recordable tracks available to
complete a planned recording.
Erase
The ERASE function is operating.
Ex-Change
During CD playback, you remove
and insert another CD.
Fade In
The FADE IN REC function is
operating.
Fade Out
The FADE OUT REC function is
operating.
Finalize
The FINALIZE function is
operating.
Incomplete!
Editing has not completed
successfully due to vibration of the
unit or a dirty or scratched disc.
Initialize
The unit does not memorize the
menu settings or the previous
playback state.
Name Full!
The number of characters used for
the track or disc names is beyond
the maximum.
-NO DISC-
There is no disc in the unit.
No Name
There is no title.
Explanation
Message
You have tried the Make-Disc
Not Blank
Synchro-Recording, with a disc
that is not blank.
• Use a blank disc for the Make-
Disc Synchro-Recording.
OPC
OPC: Optimum Power Control
The unit is optimizing itself for
best possible sound.
OPC Over
The number of times OPC
recording has been performed 90
times.
• Stop the recording and finalize
the disc.
-Over-
The playback of the last track is
over.
• Turn AMS counterclockwise (or
press . or m on the remote).
PMA Writing
PMA: Program Memory Area
A disc's information is being
updated.
Push STOP!
You operate the unit not in the
STOP mode.
• Stop the unit, and then operate the
unit again.
-Retry-
Recording or editing has been tried
again.
Step Full!
The number of programmed tracks
has reached the limit, and you
cannot program any more tracks.
• Before you program a new track,
erase the current program and
restart a new program procedure.
TEXT Edited
A disc whose text has been edited
but has not been finalized is
inserted, and OPEN/CLOSE has
been pressed.
• Finalize the disc, and then press
OPEN/CLOSE to remove the
disc. If you want to remove the
disc before finalizing it, press
OPEN/CLOSE again while
"TEXT Edited" is displayed.
Unfinalize
The UNFINALIZE function is
operating.
37