Sony RCD-W222ES - Cd/cdr Recorder Operating Instructions Manual - Page 23
Browse online or download pdf Operating Instructions Manual for Stereo System Sony RCD-W222ES - Cd/cdr Recorder. Sony RCD-W222ES - Cd/cdr Recorder 34 pages. Limited warranty (es products)
Also for Sony RCD-W222ES - Cd/cdr Recorder: Operating Instructions Manual (32 pages), Specifications (2 pages), Limited Warranty (1 pages)
Print Page
Digital signals with a sampling frequency of
44.1 kHz can be recorded without using
internal circuits of the unit. You can set this
function using the Setup Menu. (For details on
"Using the Setup Menu," see page 28.)
When using the remote, set SELECT to CDR.
MENU/NO
YES
I
AMS
SELECT
0
MENU/N
1
While the unit is stopped,
press MENU/
NO.
2 Turn AMS (or press H(/bbl
on the
remote) to select "Direct,"
and press
AMS (or YES).
3 Turn AMS (or press i44/bbl
on the
remote) to select "On," and press AMS
(or YES).
4 Press MENU/NO.
Note
Digital signals with other sampling frequencies than
44.1 kHz are automatically recorded through the
sampling rate converter of the unit, even when
"Direct" is set to "On" in Setup Menu.
You can gradually increase the recording level
at the beginning of a recording (fade-in
recording) or decrease the recording level at the
end of a recording (fade-out recording).
This function is convenient when you do not
want the track to start or end abruptly.
Before using the remote, set SELECT to CDR.
SELECT
REC FADER
Notes
l
Fading lasts for 5 seconds.
* You cannot change the setting of the DIGITAL
OPTICAL or DIGITAL COAXIAL output level
even if you make fade-in/fade-out recording.
Fade-in recording
During recording pause, press REC FADER at
the point where you want to start fade-in
recording.
"Fade In" flashes in the display, and recording
starts.
Fade-out
recording
During recording, press REC FADER at the
point where you want to start fade-out
recording.
" Fade Out" flashes in the display, and the unit
fades out and changes to recording pause.
23