Sony SA-WMS345 Service Manual
Browse online or download pdf Service Manual for Stereo System Sony SA-WMS345. Sony SA-WMS345 16 pages. Micro satellite system
Also for Sony SA-WMS345: Service Manual (16 pages)
- 1. Table of Contents
- 1. 1 Diagrams
- 1. Circuit Boards Location (SA-WMS345)
- 1. Printed Wiring Boards (SA-WMS345)
- 1. Schematic Diagram (SA-WMS345)
- 1. Q705
- 2. Leakage Test
- 2. 2 Exploded Views
- 2. Front Panel Section (SA-WMS345)
- 2. Rear Panel Section (SA-WMS345)
- 2. Center Speaker Section (SS-CN345)
- 2. Front and Surround Speakers Section (SS-V345)
- 3. 3 Electrical Parts List
- 3. Power Switch
SERVICE MANUAL
Ver 1.1 2003. 04
• SA-VE345 consists of the following models respectively.
Active Subwoofer
Front and Surround Speakers
Center Speaker
SA-VE345
For the U.S. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 8 ohm loads, from 20 – 200 Hz; rated
120 watts per channel minimum RMS power,
with no more than 0.8% total harmonic
distortion from 250 milliwatts to rated
output.
SS-V345 (front and surround speakers)
Speaker system
Full range, magnetically
shielded
Speaker units
5.5 × 11 cm
(2
× 4
in.), cone type
1/4
3/8
Enclosure type
Bass reflex
Rated impedance
8 ohms
Power handling capacity
Maximum input power: 110 watts
Sensitivity level
85 dB (1 W, 1 m)
Frequency range
120 Hz – 20,000 Hz
Dimensions (w/h/d)
Approx. 85 × 152 × 112
× 6 × 4
mm (3
3/8
including front grille
Mass
Approx. 850 g
(1 lb 14 oz) each
Sony Corporation
9-877-088-02
2003D0400-1
Home Audio Company
© 2003. 04
Published by Sony Engineering Corporation
SA-WMS345
SS-V345
SA-WMS345
SS-V345
SS-CN345
SPECIFICATIONS
SS-CN345 (center speaker)
Speaker system
Speaker units
Enclosure type
Rated impedance
Power handling capacity
Maximum input power: 110 watts
Sensitivity level
Frequency range
Dimensions (w/h/d)
Mass
SA-WMS345 (subwoofer)
Speaker system
Speaker unit
Enclosure type
Reproduction frequency range
Amplifier section
in.),
1/2
Continuous RMS power output
SA-VE345/WMS345/
SS-CN345/V345
SS-CN345
Inputs
LINE IN (input pin jack)
Full range, magnetically
SPEAKER IN (input terminals) (US, CND model only)
shielded
5.5 × 11 cm
Outputs (US, CND model only)
(2
× 4
in.), cone type
1/4
3/8
SPEAKER OUT (output terminals)
Bass reflex
8 ohms
General
Power requirements
US, CND model:
85 dB (1 W, 1 m)
AEP, UK model:
90 Hz – 20,000 Hz
AUS model:
Approx. 300 × 81 × 122
SP, MY model:
mm (11
× 3
× 4
in.),
7/8
1/4
7/8
including front grille
Power consumptions
Approx. 1100 g (2 lb 7 oz)
Dimensions (w/h/d)
Active subwoofer,
magnetically shielded
Woofer: 20 cm (8 in.),
cone type
Advanced SAW type
Mass
26 Hz – 200 Hz
120 W (US, CND model)
110 W (AEP, UK, AUS,
SP, MY model)
(8 ohms, 20 Hz – 20 kHz,
0.8% THD)
MICRO SATELLITE SYSTEM
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
120 V AC, 60 Hz
220 – 230 V AC, 50/60 Hz
220 – 240 V AC, 50/60 Hz
110 – 120/220 – 240 V AC,
50/60 Hz
90 W
1 W (standby mode)
Approx. 230 × 392 × 464
mm (9
× 15
× 18
1/8
1/2
3/8
(US, CND model)
Approx. 230 × 392 × 447
mm (AEP, UK, AUS, SP,
MY model)
including front grille
Approx. 13.2 kg (29 lb 2 oz)
– Continued on next page –
in.),
1