Sony SEN-280 Operating Instructions Manual - Page 7
Browse online or download pdf Operating Instructions Manual for Stereo System Sony SEN-280. Sony SEN-280 16 pages. Cassette decks: stereo cassette deck
Also for Sony SEN-280: User Manual (17 pages), Operating Instructions Manual (16 pages)
Print Page
=a
Sass
To equalize the listening to sound, slide each control
When speaker position is not symmetrical, adjust the
upwards to increase the level of the frequency band, and
strength of left and right speaker outputs with the left and
downwards to decrease the level.
right graphic equalizer controls.
100 Hz: Use to boost or cut the bass.
400 Hz: Use to adjust the middle frequency range.
1 kHz: Use to provide more presence of vacals.
4 kHz: Use to adjust the brightness of sound.
12 kHz: This control effects general treble. Slide downwards
to reduce high frequency noise, such as tape hiss.
To listen to the sound with the original tone quality, set all
the controls at their center positions.
Selecting the speaker system
To drive speaker system A: depress button A.
To drive speaker system B: depress button B.
To drive both speakers: depress buttons A and B.
Note
When both A and B buttons are depressed, two pairs of speaker
system should be connected. Otherwise, no sound can be heard.
For headphone listening only: keep both buttons released.
6
Forlower
For higher
SPEAKERS
frequencies
frequencies
'Cd
BAND
AUTO TUNING
TUNING
and/or — ON I OFF
FM/AM
VOLUME
FM or AM
"AUTO" appears on
the display window.
Select the band.
Select the station.
For lower
For higher
frequencies
frequencies
m è
Select the station.