Sony SS-SHAKE77 Operating Instructions Manual - Page 20
Browse online or download pdf Operating Instructions Manual for Stereo System Sony SS-SHAKE77. Sony SS-SHAKE77 48 pages. Home audio system
Also for Sony SS-SHAKE77: Service Manual (10 pages)
Print Page
USB Transfer
Transferring music
You can transfer music from a sound
source to a USB device connected to the
B port.
The audio format of files transferred by
this system is MP3. However, you can
also transfer WMA and AAC files from
USB A.
Notes
• Do not remove the USB device during
transfer or erase operations. Doing so may
corrupt the data on the USB device or damage
the USB device itself.
• MP3/WMA/AAC files are transferred with
the same bit rate as the original files.
• When transferring from an AUDIO CD,
TUNER, AUDIO IN 1 or AUDIO IN 2
function, you may select the bit rate before
transferring.
• USB transfer and erase operations are
disabled while the disc tray is open.
Note on copyright-protected
content
The transferred music is limited to private
use only. Use of the music beyond this
limit requires permission of the copyright
holders.
To select the playback source or
transfer destination (USB Memory
Select)
See page 17.
To select the bit rate
You can select a higher bit rate to transfer
music with better quality.
Use the buttons on the unit to perform this
operation.
1
Press OPTIONS.
GB
20
2
Press
/
repeatedly to select
"REC BIT RATE", then press
ENTER.
3
Press
/
repeatedly to select the
bit rate you want, then press
ENTER.
• 128 KBPS: encoded MP3 tracks have
smaller file size and lower audio
quality.
• 256 KBPS: encoded MP3 tracks have
bigger file size but higher audio
quality.
To exit the options menu, press
OPTIONS on the unit.
Transferring music from a disc
or USB device
You can easily transfer all the music on a
disc or USB A to USB B (Synchronized
Transfer). You can also transfer a single
track or audio file during playback
(REC1 Transfer).
Use the buttons on the unit to perform this
operation.
1
Connect a transferable USB
device to the
below.
USB device
Note
You can use a USB adaptor (not supplied) to
connect the USB device to the unit if the
USB device cannot be plugged into the
port.
B port as shown