Sony ST-SDE700 Operating Instructions Manual - Page 25

Browse online or download pdf Operating Instructions Manual for Stereo System Sony ST-SDE700. Sony ST-SDE700 32 pages. Dab/fm/am tuner

Print Page

Other Operations

Changing the display

You can check the status of this tuner and the
information about the programme using the
display.
Be sure to use the buttons on the tuner for this
operation.
Press DISPLAY.
Each time you press the button, the display
changes cyclically as follows.
FM and AM band
Program Service name
b)
t Frequency t Program
preset station
a)
Type indication
t Radio Text indication
t Current Time indication (in 24-hour
a)
system)
a)
RDS
During
reception only (page 23).
b)
Index name appears only when you have assigned
one to the preset station (page 23). Index name
does not appear when only blank spaces have been
entered.
DAB band
Service Component Label t Frequency t
Program Type indication t Dynamic label
segment t Current Time indication (in 24-
a)
t Channel label t Audio
hour system)
b)
t Signal Quality
info
a)
Time information appearing in the display is sent
by the DAB station. As a result, the time may not
be displayed properly if the station is located in a
different time zone.
"_ _H _ _M" will display until time information is
received.
b)
Audio information on bit rate (32kbps - 256kbps),
signal type (stereo, dual, mono) and sampling type
(F: 48kHz, H: 24kHz) is displayed.
Example: 128K S F
c)
The DAB station signal quality is displayed.
"Q. _ _ _" is displayed until the signal quality
information is received.
a)
or index name of the
a)
c)
Note
When "STEREO" appears in the display, the current
program is broadcasted in the stereo/joint (intensity)
stereo mode.
25
GB