Sony STR-DH130 Operating Instructions Manual - Page 19
Browse online or download pdf Operating Instructions Manual for Stereo System Sony STR-DH130. Sony STR-DH130 36 pages. Fm stereo / fm-am receiver
Also for Sony STR-DH130: Quick Setup Manual (2 pages), Specifications (2 pages), Limited Warranty (1 pages), Service Manual (36 pages), Operating Instructions Manual (35 pages), Service Manual (36 pages)
Print Page
Selecting the speaker
system
You can select the speakers you want to drive,
if you have connected the speakers to
SPEAKERS
A
and
B
Be sure to use the buttons on the receiver to
perform this operation.
SPEAKERS (OFF/A/B/A+B)
Press SPEAKERS (OFF/A/B/A+B)
repeatedly to select the speaker
system you want to drive.
To select
The speakers connected to the
SPEAKERS A terminals
The speakers connected to the
SPEAKERS B terminals
The speakers connected to both the
SPEAKERS A and B terminals
(parallel connection)
To turn off the speaker output
Press SPEAKERS (OFF/A/B/A+B)
repeatedly until the "SP A" and "SP B"
indicators on the display do not light up.
Note
You cannot switch the speaker system by pressing
SPEAKERS (OFF/A/B/A+B) when the headphones
are connected.
terminals.
Light up
SP A
SP B
SP A
SP B
Adjusting the tone
You can adjust the tonal quality of the
speakers.
BASS
+/–
Press TREBLE + or TREBLE –
repeatedly to adjust the treble
level.
Press BASS + or BASS –
repeatedly to adjust the bass level.
You can adjust from –10 dB to +10 dB in 1 dB
step.
The initial setting is 0 dB.
TREBLE
+/–
GB
19