E:\Working\2693038211\269303821MEXBT5000U\01US02CD-U.fm
E:\Working\2693038211\269303821MEXBT5000U\01US02CD-U.fm
01US+00COV-U.book Page 13 Thursday, April 27, 2006 11:03 PM
Notes
• While connecting to a Bluetooth device, this unit
cannot be detected from another device. To be
detected, disconnect the current connection and
search for this unit from another device.
• Depending on the device, searching from this unit
may not be possible. In this case, search for this unit
from the connecting device.
• If you search for this unit and the connecting device
mutually at the same time, this unit will not recognize
the connecting device.
• It may take time to search or connect.
• Depending on the device, the confirmation display of
the connection appears before inputting the
passcode.
• The time limit for inputting the passcode differs
depending on the device.
• This unit can register up to 6 devices each for
handsfree and audio devices.
Connecting to registered devices
Devices are registered once paired and connected
with this unit. You can select the registered
device and connect it.
1
Press (Bluetooth).
The Bluetooth function menu appears.
2
Select "Connectivity" c "Handsfree
Devices" or "Audio Devices."
The list of registered devices appears.
3
Select the device to connect.
4
Select "Connect."
"Connected" appears and connection is
complete.
" " or " " appears during connection.
To stop the connection
Select "Disconnect" c "yes" in step 4.
Tip
Depending on the device, it may be possible to select
this unit from the device, and then connect.
Handsfree talking
Check that this unit and the cellular phone are
connected beforehand (page 12, 13).
Notes
• For details on operation when a cellular phone with
Bluetooth audio streaming function is connected as
an audio device, see "Listening to music from an
audio device" on page 15.
• The microphone of this unit is located on the rear of
the front panel (page 8). Do not mask the
microphone with tape, etc.
Making calls
You can make a call from the connected cellular
phone by operating this unit.
1
Press (CALL).
The CALL menu appears.
2
Select the items in the following order,
then press the joystick to start calling.
CALL menu
Dialed Calls*
Selects from the dialed call history. (Maximum
storable name and phone numbers: 10)
Name and phone number to call c "Call"
Select "Delete" to delete the name and phone
number, "Delete All" to clear the history.
Received Calls*
Selects from the received call history.
(Maximum storable name and phone
numbers:10)
Name and phone number to call c "Call"
Select "Delete" to delete the name and phone
number, "Delete All" to clear the history.
Phonebook*
Selects from the phonebook list. (Maximum
storable name and phone numbers: 50)
"Contact List" c Name to call c the name and
phone number
For details on how to store in the phonebook,
see "Using the Phonebook" on page 14 and
"Setting a handsfree device" on page 15.
Dial
Inputs the phone number.
Phone number can also be input with the
number buttons of the card remote commander.
To input "+," press and hold the 0 button.
Preset Dial*
Selects the phone number stored in a number
button.
Preset number (P1 – P6) c "Call"
For details on how to store in the number
buttons, see "Using the Preset Dial" on page 14.
* If you set "Security" (page 16), "Security Locked"
appears and operation is not possible.
continue to next page t
2-693-038-21 (1)
masterpage:Right
masterpage:Right
13
MEX-BT5000
Print Page