Sony ZS-S2iP Operating Instructions - Page 2
Browse online or download pdf Operating Instructions for Stereo System Sony ZS-S2iP. Sony ZS-S2iP 2 pages. Personal audio system
Also for Sony ZS-S2iP: Operating Instructions (2 pages), Specifications (2 pages)
Print Page
Basic Operations
* VOLUME +
and
have a tactile dot.
* VOLUME +
has a tactile dot.
Before using the unit
Falling asleep to music
1
Play the music source you want.
To turn on/off the power
2
Press SLEEP
European model: Press OPERATE
.
Australia and New Zealand model: Press POWER
.
3
Press SLEEP
goes off automatically.
To adjust the volume
Each time you press the button, the indication
Press VOLUME +, –
.
changes as follows:
"60" "90" "120" "OFF" "10"
To listen through headphones
Connect the headphones to the (headphones) jack
"20" "30".
.
To reinforce the bass sound
To cancel the sleep function
Press MEGA BASS
.
Press OPERATE (or POWER)
"MEGA BASS" appears in the display.
To return to normal sound, press the button again.
For carrying the unit
Always remove the iPod and store the sliding tray when
carrying the unit.
Opening/closing the Sliding Tray
*
Setting the iPod
1
Press the PUSH OPEN/CLOSE button
The Sliding Tray
2
Pull the Sliding Tray
3
Attach the iPod Universal Dock Adapter if necessary
*
(not supplied).
4
Place your iPod on the Sliding Tray
5
Push in and adjust the Sliding Tray
iPod fits on the Back Support
Closing the Sliding Tray
1
Remove the iPod.
*
2
Push the Sliding Tray
3
Press the PUSH OPEN/CLOSE button
4
Push the Sliding Tray
Notes
Do not carry the unit with an iPod set on the connector. Doing so
may cause a malfunction.
Be sure to store the Sliding Tray
to display "SLEEP."
to select the minutes until the player
Playing the iPod
1
Press iPod
(direct power-on).
"DC OUT" appears in the display (AC only).
to turn off the power.
2
Press
.
The iPod begins to play.
You can operate the connected iPod by the unit or the
iPod buttons.
To
Press
Pause playback
To resume play, press it again.
Stop playback
Go to the next
track
Go back to the
previous track
Locate a point
while listening to
the sound
you find the point.
Locate a point
while observing
on the iPod
find the point.
display
Select a menu
Press MENU and
remote to select a menu, and then
press ENTER
Go back to the
Press MENU
previous menu
Notes
You may use the universal adaptor supplied with your iPod for a
more customized fit. The iPod may be docked without the use of an
adaptor.
If you connect the iPod when another function is in use, the
function will change to iPod automatically.
Apple's iPod Universal Dock Adapter (not supplied) can be used
with this unit.
To use an iPod, refer to the user's guide of your iPod.
Before disconnecting the iPod, pause playback.
To use the unit as a battery charger (AC only)
You can use the unit as a battery charger. The charging
status appears in the iPod display. For details, see the
user's guide of your iPod.
On copyrights
iPod is a trademark of Apple Inc., registered in the U.S.
and other countries.
All other trademarks and registered trademarks are of
their respective holders. In this manual, ™ and ® marks
are not specified.
Apple is not responsible for the operation of this device
or its compliance with safety and regulatory standards.
Playing a CD
1
Press CD
(direct power-on).
2
Press PUSH OPEN/CLOSE
.
the label side up in the CD compartment.
is ejected half way.
To close the CD compartment, press PUSH OPEN/
all the way out.
CLOSE
.
.
3
Press
.
The player plays all the tracks once.
so that the
.
Track
number
To
Press
Pause playback
To resume play, press it again.
Back Support
Stop playback
Go to the next
track
Go back to the
previous track
Locate a point
(forward) or
while listening to
while playing and hold it until
the sound
you find the point.
Locate a point
(forward) or
while observing
in pause and hold it until you
the display
find the point.
Remove the CD
PUSH OPEN/CLOSE
until it clicks.
Using the display
.
into the unit.
To check the total track number and playing
time
In stop mode, press DISPLAY•ENTER
on the remote.
before moving the unit.
To check the remaining time
Press DISPLAY•ENTER
or DISPLAY
remote repeatedly while playing a CD. The display
changes as follows:
The current track number and playing time
The current track number and the
remaining time of the current track*
The number of tracks left and remaining
time on the CD
* For a track whose number is more than 20, the remaining time
appears as "- -:- -" in the display.
(forward) or
(backward)
while playing and hold it until
(forward) or
(backward)
in pause and hold it until you
or
on the
.
on the remote.
Selecting the play mode
Press MODE
until "
1", " ", "SHUF", "SHUF" and
" ", "PGM", or "PGM" and " " appear in the display.
and place a disc with
Then proceed as follows:
To Select
Select
Then do this
Repeat a
"
1"
Press
or
single track
select the track that you want
to repeat, then press
Repeat all
" "
Press
tracks
Shuffle play "SHUF"
Press
Repeat tracks
"SHUF"
Press
in random
and " "
order
Program
"PGM"
Press
or
play
press DISPLAY•ENTER
or ENTER
for the tracks (up to 20) you
want to program in the order
Playing
you want. Then press
time
Programed
track
Repeat
"PGM"
Press
or
programed
and " "
press DISPLAY•ENTER
tracks
or ENTER
for the tracks (up to 20) you
want to program in the order
you want. Then Press
(backward)
To cancel the selected play mode
Press MODE
repeatedly until the selected mode
disappears from the display.
(backward)
To check the programed track and playing
order in the display
To check the order of tracks before play, press
DISPLAY•ENTER
or ENTER
on the remote.
Every time you press the button, the track number
appears in the programed order.
To change the current program
Press
once if the CD is stopped and twice if the CD
is playing. The current program will be erased. Then
create a new program following the programing
or DISPLAY
procedure.
Tip
You can play the same program again, since the program is saved
until you open the CD compartment.
on the
Listening to the radio
1
Press RADIO•BAND•AUTO PRESET
(direct power-on) or press RADIO
BAND
repeatedly on the remote.
Each time you press the button, the indication
changes as follows:
"FM" "AM"
2
Hold down TUNE + or –
until the frequency
digits begin to change in the display.
The player automatically scans the radio frequencies
and stops when it finds a clear station.
If you can't tune in a station, press the button
repeatedly to change the frequency step by step.
When an FM stereo broadcast is received, "ST"
appears.
Tips
If the FM broadcast is noisy, press MODE
in the display and the radio will play in monaural.
If you touch or operate an iPod connected to this unit while
listening to AM/FM, noise may occur. Avoid touching or operating
the iPod in this case.
If you hear noise from the AM/FM while supplying power to iPod
("DC OUT" indicator appears in the display), press and hold
MODE
for a few seconds to stop the power supply to the iPod
("DC OUT" indicator disappears from the display).
Presetting radio stations
You can store radio stations into the player's memory.
You can preset up to 30 radio stations, 20 for FM and 10
for AM in any order.
1
Press RADIO•BAND•AUTO PRESET
or BAND
the remote to select the band.
to
2
Hold down RADIO•BAND•AUTO PRESET
.
RADIO
on the remote for 2 seconds until "AUTO"
flashes in the display.
.
3
Press DISPLAY•ENTER
or ENTER
on the
remote.
.
The stations are stored in memory from the lower
.
frequencies to the higher ones.
If a station cannot be preset automatically
then
You need to preset a station with a weak signal manually.
1
Press RADIO•BAND•AUTO PRESET
or BAND
on the remote
the remote to select the band.
2
Tune in a station you want.
.
3
Hold down DISPLAY•ENTER
or ENTER
remote for 2 seconds until the preset number
flashes in the display.
Playing
4
Press PRESET + or –
until the preset number you
order
want for the station flashes in the display.
then
5
Press DISPLAY•ENTER
or ENTER
on the
remote.
on the remote
The new station replaces the old one.
Tip
.
The preset radio stations remain in memory even if you unplug the
AC power cord or remove the batteries.
Playing preset radio stations
1
Press RADIO•BAND•AUTO PRESET
or BAND
the remote to select the band.
2
Press PRESET + or –
to tune in the stored station.
Connecting optional components
You can enjoy the sound from an optional component
such as a portable digital music player through the
speakers of this unit. Be sure to turn off the power of
each component before making any connections. For
details, refer to the instruction manual of the component
to be connected.
1
Connect the AUDIO IN jack
on the unit to the
line output jack of the portable digital music player
or other components using an audio connecting
cable (not supplied).
2
Turn the unit and the connected component on.
repeatedly
3
Press AUDIO IN
and start playing sound on the
and press
connected component.
The sound from the connected component is output
from the speakers.
To connect the unit to a TV or VCR, use an extension
cable (not supplied) with a stereo-mini jack on one
end and two phono plugs on the other end.
until "Mono" appears
on
or
on
on the
on