Sony ZSSN10S Operating Instructions Manual - Page 23
Browse online or download pdf Operating Instructions Manual for Stereo System Sony ZSSN10S. Sony ZSSN10S 36 pages. Personal audio system
Print Page
Labeling the preset
stations
You can label each preset station with up to
11 characters.
DISPLAY
1
Select the station you want to label (see
page 22).
2
Press and hold ENTER/MEMORY for
about 2 seconds.
The preset number and the frequency
flash.
3
Press ENTER/MEMORY.
The cursor flashes.
4
Turn the jog dial to select a character to
be used in the new station name.
Jog dial
TUNE –, +
ENTER/
MEMORY
5
Press TUNE + to move to the next
character to be entered.
6
Repeat steps 4 and 5 until you finish
entering the station name.
7
Press ENTER/MEMORY.
Tips
• In step 4 above, you can skip to the different
types of characters by pressing DISPLAY. Each
time you press the button, the indication skips as
follows:
Alphabet (upper case) t Alphabet (lower case)
t Numbers and marks t Blank space
• The characters you can use for labeling the
stations are as follows:
– A to Z
– a to z
– 0 to 9
– ! " # $ % & ( ) * . ; < = > ? @ _ ' + – ' , / :
– (space)
To change the station name
1 Follow steps 1 to 3.
2 Press TUNE + or – to select the character
you want to change.
3 Turn the jog dial to select a new character.
4 Repeat steps 2 and 3 until you finish
changing the name.
5 Press ENTER/MEMORY.
Tips
• When you want to erase a character, enter a
blank space instead of a character.
• Only a blank space between characters or before
a character is recognized as a blank space.
• Even if you preset stations automatically again,
station names will be retained for stations at the
same frequency.
23