Cisco ASR 9906 Manual - Page 34

Browse online or download pdf Manual for Network Hardware Cisco ASR 9906. Cisco ASR 9906 44 pages. Replacing cisco asr 9000 series router components

Print Page
Migrating from RSP440 to RSP880 or RSP880-LT Card
perform redundancy switchover from RSP0 to RSP1, and make RSP1 as active RSP.
Step 2
Remove the standby RSP440 (RSP0) and insert RSP880 in slot 0. Follow the procedure explained in the topic
Removing and Replacing Cards from the Chassis, on page
Step 3
Connect to RSP880 console port and type CTRL+C to break into ROMMON.
Step 4
From the ROMMON prompt, set ROMMON variable to activate 1GE mode for peer RSP communication.
Example:
ROMMON prompt on RSP880 (A)
rommon B1> RSP_LINK_1G=1
rommon B1> sync
Example:
ROMMON prompt on RSP880-LT
rommon B1> RSP_LINK_1G=1
rommon B1> ALDRIN_VERSION_DISABLE=1
rommon B1> RSP4L_ALDRIN_1G=1
rommon B1> sync
Step 5
Verify that config register is set correctly in ROMMON.
Example:
rommon B1> confreg
Step 6
Reset RSP880 card. Now the RSP880 becomes the standby RSP in slot 0 and synchronizes configuration
from active RSP440 in slot 1.
Example:
rommon B1> reset –h
Note
Step 7
Wait until standby node reaches NSR-ready state and status of ALL the groups is Ready state. Use show
redundancy command to verify the same.
Example:
Router# show redundancy
Tue Nov 18 07:51:47.098 EDT
Redundancy information for node 0/RSP0/CPU0:
==========================================
Node 0/RSP1/CPU0 is in ACTIVE role
Node Redundancy Partner (0/RSP0/CPU0) is in STANDBY role
Standby node in 0/RSP0/CPU0 is ready
Standby node in 0/RSP0/CPU0 is NSR- ready
Node 0/RSP1/CPU0 is in process group PRIMARY role
Process Redundancy Partner (0/RSP0/CPU0) is in BACKUP role
Backup node in 0/RSP0/CPU0 is ready
Replacing Cisco ASR 9000 Series Router Components
34
The RSP880 reloads and the user is disconnected from ROMMON automatically.
Replacing Cisco ASR 9000 Series Router Components
25.