Cisco C1101-4PLTEPWx Installation And Connection - Page 2

Browse online or download pdf Installation And Connection for Network Hardware Cisco C1101-4PLTEPWx. Cisco C1101-4PLTEPWx 27 pages. This chapter describes how to install and connect cisco 1000 series integrated services router (isr) to lan and wan networks.

Print Page

Cisco C1101-4PLTEPWx Installation And Connection

Rack Mount

Note

You can install external modules before or after mounting a router. However, if you choose to install the

external modules after mounting the router on the rack or wall, ensure that you have optimal access to the

back/front panel of the router.

For information on modules and Field Replaceable Units (FRUs), see the

FRUs

Depending on the model, the available options for mounting a Cisco 1100 ISR are:

Table 1: Models and Mounting Options

Model

C111x and C1111X

C1101-4P

C1101-4PLTEPWx

C1109-2PLTExx

C1109-4PLTEPWx

C1121-4Px

C1126(X)-8PLTEP

C1128(X)-8PLTEP

If you choose to setup the router on a desktop, you can place the router on a desktop, bench top or on a shelf.

Rack Mount

The router is shipped with rack mounting brackets that are to be secured on the sides of the chassis. You must

first secure rack mounting brackets on the chassis before you set up the chassis on the rack.

Caution

Do not stack multiple Cisco 1000 ISRs when mounting the routers on a table top.

Install and Connect the Router

section.

Mounting Options

Desktop,

using-Din-Rail

Desktop,

Rack

Mount,

Wall Mount using Key-hole

Wall Mount using Key-hole Slots

Wall Mount using Key-Hole Slots

Wall Mount using Key-Hole

Wall Mount using Key-Hole Slots

Rack Mounting using Din-Rail

Install and Connect the Router

Install and Upgrade Modules and

Slots,

Wall Mount

Slots,

Brackets, Under Desk